703782
21
Zoom out
Zoom in
Previous page
1/56
Next page
21
Assembling the Device
The device is preassembled. The individual parts are connected to one
another by a cable. Make sure when plugging together and screwing on the
individual parts that you do not trap or pull out the cable.
Place the device on a level oor surface. Place a protective lm underneath
to prevent any damage to delicate surfaces.
Remove all packaging materials from the area in which you are working.
Ensure that there is enough space around the device.
1. If not preassembled, plug the two parts of the telescoping rod into one another and
screw them together with a locking screw. On this connection piece, the telescoping
rod can also be adjusted to three different heights (80-113 cm).
2. Plug the control unit onto the telescoping rod.
3. Push the threaded rod through the holes on the left and right and screw the cap
nuts onto the threaded rod from both sides. Make sure that you tighten the cap nuts
against one another.
4. Push the assembled telescoping rod with the control unit into the recess on the back
of the base.
5. Screw the telescoping rod rmly to the base with three locking screws.
The device is now ready for use.
Use
CAUTION!
If your health means that you belong to a risk group, you should always consult your
doctor before using the device. If necessary, coordinate your use programme with
him.
Do not use the device if you have vein in ammation, thromboses, swellings or acute
in ammation. Ask your doctor whether it is safe for you to use the device.
Pregnant women should not use the device or should use it only after consultation
with their doctor.
Stop using the device immediately if you suddenly feel weak or dizzy. If you feel
sick, have pain in your chest or arms, an irregular heartbeat, shortness of breath or
other unusual symptoms, seek medical attention immediately.
To make it easy to handle, the device is equipped with castors on the back
of the base. This means that you can easily switch over the vibrating mas-
sage device.
Do not use the device shortly after eating; wait at least 1 hour before you
start training.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Maxx Vibrations - 08602 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Maxx Vibrations - 08602 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info