770444

Power Dynamics PD800 - 179.001 Manual

5
Zoom out
Zoom in
Previous page
1/22
Next page
5
Group adjustment
1. The “GROUP SELECT” icon is used to adjust the transmitter frequency group.
2. In the main menu, press the “SET” button to the “GROUP SELECT” icon.
3. When the “GROUP SELECT” icon is displayed, press the “UP” button to increase the group number or “DOWN” button
to decrease the group number. When the “UP”/“DOWN” button is pressed steadily, the group number will be increased
/ decreased in a fast manner until the button is released.
4. Once the desired frequency group is reached, press the “SET” button to save and go to the next menu, if have to any
operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit
5. to the main status without save.
Channel adjustment
1. The “CHANNEL SELECT” icon is used to adjust the transmitter frequency channel.
2. In the main menu, press the “SET” button to the “CHANNEL SELECT” icon.
3. When the “CHANNEL SELECT” icon is displayed, press the “UP” button to increase the channel number or “DOWN”
button to decrease the channel number. When the “UP”/“DOWN” button is pressed longer time, the channel number
will be increased / decreased in a fast manner until the button is released.
4. Once the desired frequency channel is reached, press the “SET” button to save and go to the next menu, if have no
any operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main
status without saving.
Audio Mode adjustment
1. The “MODE SELECT” icon is used to adjust the transmitter audio inputs mode.
2. In the main menu, press the “SET” button to the “MODE SELECT” icon.
3. When the “MODE SELECT” icon is displayed, press the “UP” button to select “STEREO” mode and “DOWN” button to
select “MONO” mode.
4. Once the desired frequency group is reached, press the “SET” button to save and go to the next menu, if have no any
operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status
without save.
Power Mode Adjustment
1. The “POWER SELECT” icon is used to adjust the transmitter radiated power.
2. In the main menu, press the “SET” button to the “POWER SELECT” icon.
3. When the “POWER SELECT” icon is displayed, press the “UP” button to select “H” mode for higher radiant power and
“DOWN” button to select “L” mode for lower radiant power.
4. Once the desired frequency group is reached, press the “SET” button to save and go to the next menu, if have no any
operation in 5 seconds, the receiver will exit to the main status. If press the “POWER” button to exit to the main status
without save.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics PD800 - 179.001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics PD800 - 179.001 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 1.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info