506128
28
Zoom out
Zoom in
Previous page
1/32
Next page
28 - 32
Instalación
Conectar entradas
Ambas entradas son balanceadas. Si no dispone de una salida balanceada, también puede usar una
no balanceada, puentee el pin 3 – con el pin1 (masa) (véase debajo). Las líneas no balanceadas
pueden generar ruidos si las distancias son muy largas.
1= tierra / masa, 2=señal +, 3=señal –
Conectar salidas
Asegúrese de que el amplificador está apagado antes de hacer las conexiones. Los altavoces pueden
conectarse usando conectores NL4 o cable pelado para los bornes. Utilizando la guía que damos a
continuación seleccione la sección apropiada del cable según la distancia entre el amplificador y el
altavoz.
Distancia Sección del cable
<10m 1.5mm2
>10m <20m 2.5mm2
>20m <30m 4.0mm2
NOTA: ¡Nunca conecte la salida (+) a masa o a la salida (-) y nunca conecte la salida (+) a otras
salidas!
Conecte la alimentación
Antes de enchufar el aparato siempre asegúrese de que la fuente de alimentación se ajusta al voltaje
especificado. Primero conecte extremo del cable con el conector IEC a la base IEC en el amplificador
y luego conecte el otro extremo del cable a la toma de corriente.
Por favor lea las siguientes instrucciones para un funcionamiento fiable y sin
problemas:
Asegúrese de que todas las conexiones se hayan hecho correctamente.
Compruebe si los altavoces conectados son compatibles con el amplificador.
Asegúrese de que haya la ventilación adecuada.
Evite exponerlo a la humedad.
Nunca conecte o desconecte los altavoces mientras esté en funcionamiento, ya que puede
resultar en serios daños.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics B Serie PDA B 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics B Serie PDA B 2000 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info