770465

Power Dynamics 952.160 - PRM1202 Manual

4
Zoom out
Zoom in
Previous page
1/27
Next page
4
REAR PANEL
23. IEC Mains power inlet
24. 24V dc power terminals
25. Speaker output terminals Zone 1 and Zone2
26. Line output Zone 1 and Zone 2
27. Line 4 input (2x RCA)
28. Line 3 input (2x RCA)
29. Microphone 3 or Line 2 input 6.3mm jack
30. Microphone 2 or Line 1 input 6.3mm jack
31. Dip switch
32. Microphone 1 XLR input
DIP SWITCHES
Adjacent to the XLR microphone input for channel 1 is a bank of 4 DIP switches (31). The right-hand
switch is marked ‘VOX’, which sets priority for Mic.1. When this is switched on, any sound through Mic.1
will temporarily mute other inputs.
The next DIP switch enables +20V phantom power on the Mic.1 XLR input. Some condenser
microphones require this phantom power to operate.
The 2 remaining DIP switches are used to set channels to Mic or Line level.
Noted: Be sure to make these DIP switch settings when the amplifier is switched off. Making any changes when the amplifier is
powered up may cause loud bangs through the system which can damage the speakers.
SPEAKER OUTPUTS
The PRM1202 has a separate speaker output for each zone (25) connected via a single terminal block.
Each zone output can be used to power either 100V line speakers or 8Ω speakers.
These configurations cannot be used together, so it is important to decide which will be used at the start.
DC INPUT
The PRM1202 can be operated by 24Vdc power for mobile applications (boats, fairgrounds etc.)
For this type of application, connect the 24Vdc power source to the DC input terminals on the rear panel
(24).
CONNECTING WITH BT
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
2. Press the “BT” button and activate BT-function.
3. Select “PRM-AMPLIFIER” on your BT-device and make the BT-connection
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics 952.160 - PRM1202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics 952.160 - PRM1202 in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 0.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info