766734
6
Zoom out
Zoom in
Previous page
1/28
Next page
TROUBLESHOOTING
PROBLEM INDICATOR SOLUTION
No sound Red transmitter indicator is not flash Slide transmitter POWER ON/OFF
switch to ON position. Make sure
battery is inserted properly, observing
battery (+ / -). If battery is inserted
properl
y
, replace with fresh batter
y
.
No sound Red transmitter indicator is flash. Slide transmitter MUTE/ON switch to
ON position.
No sound Red receiver indicator POWER light
off. Make sure AC adapter is securely
plugged into electrical outlet and into
DC input connector.
Make sure AC electrical outlet works
and supplies proper volta
g
e.
No sound Receiver signal indicators A/B lights
glowing.
Turn up receiver volume control.
Confirm that the output connections
from the receiver to the external
equipment are secure.
No sound Receiver signal indicators A/B lights
off. Transmitter and receiver POWER
li
g
ht
g
lowin
g
.
Confirm transmitters and receivers
frequencies match. Move transmitter
closer to receiver.
Sound level differs from level of
a cabled instrument. Receiver signal indicators A/B lights
glowing. Adjust transmitter gain level to
compessary.
A
d
j
ust receiver volume as necessar
y
.
Distortion level increases
gradually Receiver signal indicators A/B lights
and transmitter LOW BATTERY light
g
lowin
g
Replace transmitter battery
Bursts of noise or other audible
radio signals present. Signal indicators A/B/ lights on. Identify potential sources of
interferences (other RF-sources) and
turn off, remove or use a wireless
system operating on a different
frequenc
y
.
Momentary loss of sound as
transmitter is moved around
performing area.
Receiver signal indicator A/B lights of
when sound is lost Reposition receiver and perform walk-
through test again. If audio dropouts
persist, mark “dead” spots and avoid
them durin
g
performance.
TECHNICAL SPECIFICATION
PF781 PD782
Ref.nr: 179.193 179.196
Frequency range 863-865Mhz 863-865Mhz
Frequency response 50Hz-18kHz 50Hz-18kHz
Signal/Noise ratio > 105dB > 105dB
Rated voltage AC220~240V 50Hz AC220~240V 50Hz
Adapter 13-15V DC / 500mA 13-15V DC / 500mA
Dimensions per unit 215 x 170 x 50 mm 215 x 170 x 50 mm
Handheld PDM3 Bodypack PDB3
(OPTIONAL)
Ref.nr: 179.193H 179.200
Frequency range 863-865Mhz 863-865Mhz
Battery 2x 1.5V AA Battery 2x 1.5V AA Battery
RF output >10dBm >10dBm
Dimensions per unit 238 x 50 x 50 mm 100 x 65 x 30 mm
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior
notice.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics 179.193 - PD781 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics 179.193 - PD781 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info