766765

Power Dynamics 179.004 PD504-Series Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
OPERATION
• Switch on the receiver with the power switch.
• Screw or open the battery cover of microphone and put
new or full charged battery inside. Press the power
switch on the microphone for 2 seconds, to switch on.
Select your transmission channel, with the ▲ and ▼
button on the receiver. Hold the IR sensor of microphone
close to the IR sensor of the receiver. Press shortly on
the SET button of the respective channel to synchronize
the microphone.
• When the receiver and the microphone have been set to
the same transmission channel, the RF bargraph on the
receiver’s display will indicate that a radio signal is being
received.
Noted: how more numbers of bars are displayed, how
better is the reception.
• Screw or close the battery cover onto the microphone again.
For optimum receiving:
• Reposition the receiver so there is nothing obstructing a line of sight to the microphones (including the audience).
• Avoid placing microphone and receiver where metal or other dense materials may be present.
• Place the receiver on the top of the equipment rack.
• Remove nearby sources of wireless interference, such as cell phones, two-way radios, computers, media players, Wi-
Fi devices, and digital signal processors.
• Charge or replace the microphone battery.
• Keep microphones more than two meters (6 feet) from each other.
• Keep the microphones and receiver more than 5 meters (16 feet) apart.
• During sound check, mark trouble spots and ask presenters or performers to avoid those area.
HEADSET MICROPHONE
Connect the connecter of supplied headset microphone to the
connecting jack of bodypack.
Position the headset microphone approx. 15 mm (1/2 inch) from
the opening of your mouth.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Power Dynamics 179.004 PD504-Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics 179.004 PD504-Series in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info