Manual Power Dynamics 171.194 - PDA-B2000 (page 5 of 30) (English, German, Dutch, Spanish)

766754

Zoom out

Zoom in

1/30

171.193

171.194

171.196

PDA-B1500 2x 750W

PDA-B2000 2x 1000W

PDA-B2500 2x 1200W

-SERI

2 - 30

Important Safety Information

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

1. Handle the power supply cord carefully

Do not damage or deform the power supply cord.

If it is damaged or deformed, it may cause

electric shock or malfunction when used. When

removing from wall outlet, be sure to remove by

holding the plug attachment and not by pulling

the cord.

2. In order to prevent electric shock, do not open

the top cover. If a problem occurs, contact your

dealer.

3. Do not place metal objects or spill liquid

inside the unit. Electric shock or malfunction

may result.

USE OF CONTROLS OR ADJUSTMENTS OR

REFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE. THE UNIT SHOULD NOT BE

ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE

PERSONNEL DOUBLE INSULATED. WHEN

SERVICING, USE ONLY IDENTICAL

REPLACEMENT PARTS.

CAUTION: TO REDUCE THE NOTE:

RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK ) . THERE ARE NO

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of un insulated

"dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

NOTE:

This unit may cause interference to radio and television reception

3 - 30

Important Safety Instructions

1. Read Instructions – All the safety and operating

instructions should be read before this product is

operated.

2. Retain Instructions － The safety and operating

instructions should be retained for future reference.

3. Heed Warnings － All warnings on the appliance

and in

the operating instructions should be adhered to.

4. Follow Instructions － All operating and use

instructions should be followed.

5. Improper installaction can cause serious damage to

people and property.

6. Water and Moisture － The appliance should not be

used near water - for example, near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, and the like.

7. Carts and Stands － The appliance should be used

only with a cart or stand that is recommended by the

manufacturer. An appliance and cart

combination should be moved with

care.

Quick stops, excessive force, and

uneven surfaces may cause the

appliance and cart combination to

overturn.

8. Wall or Ceiling Mounting － The product should be

mounted to a wall or ceiling only as recommended by

the manufacturer.

9. Heat － The appliance should be situated away

from heat sources such as radiators, heat registers,

stoves, or other appliances (including amplifiers) that

produce heat.

10. Power Sources – This product should be operated

only from the type of power source indicated on the

making label. If you are not sure of the type of power

supply to your home, consult your product dealer or

local power company. For products intended to

operate from battery power, or other sources, refer

the operating instructions.

11. Power-Cord Protection－Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or against

them, paying particular attention to the cord in

correspondence of plugs, convenience receptacles,

and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only

as recommended by the manufacturer. Clean by

wiping with a cloth slightly damp with water. Avoid

getting water inside the appliance.

13. Non-use Periods－The power cord of the

appliance should be unplugged from the outlet when

left unused for a long period of time.

14. Object and Liquid Entry －Care should be taken

so that objects do not fall and liquids are not spilled

into the enclosure through openings.

15. Damage Requiring Service－The appliance

should be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into

the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally

or exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure

damaged.

16. Servicing－The user should not attempt any service

to the appliance beyond that described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17. Ventilation – Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the product and to protect it from overheating, and

these openings must not be blocked or covered. The

openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface.

This product should not be placed in a built-in

installation such as a bookcase or rack unless proper

ventilation is the manufacturer’s instructions have been

adhered to.

18. Attachments – do not use attachments not

recommended by the product manufacturer as they

may cause hazards.

19. Accessories – Do not place this product on an

unstable cart, stand, tripod, bracket, or table. The

product may fall, causing serious injury to a child or

adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the

product. Any mounting of the product should follow the

manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

20. Lightning – For added protection for this product

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the product due to lightning

and power-line surges.

21. Replacement Parts – When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or

have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22. Safety Check – Upon completion of any service or

repairs to this product, ask the service technician to

perform safety checks to determine that the product is

in proper operating condition.

4 - 30

Features

Power Dynamics Professional stereo audio amplifier featuring high output power and excellent value

for money. The CPA range of amplifiers are ideal for the starting DJ, smaller fixed installations in

pubs, clubs canteens etc. or as a complement in larger disco installations.

 Blue LCD display for temperature,

operating mode, output power, protection

and audio level indication.

 Active crossover, highpass or lowpass.

 Outstanding sound quality

 Protection against high temperatures

 Stereo and bridge mode

 Signal, Clip & Protect indication for each

channel

 Inputs via XLR & 6.3mm jack

 Speaker NL4 & binding post outputs

 Temperature controlled cooling fans

Front Panel Features

1. Cooling Vents.

Front to rear forced airflow.

2. Volume Controls.

These controls adjust the volume level of both channels. Turn slightly to the left when the clip

indicators (4) light up.

3. Protect Indication.

When on any given point, something damaging might occur to your amplifier, it will switch in protect

mode. The amplifier will disconnect the point where the damage is about to occur and switch on the

protection led to indicate to you that something is wrong. Reasons might be: Bad ventilation,

A low impedance (< 4 Ohm), Defect fan(s), A short circuit in cables.

4. Clip Iindication.

These LEDs will light up when one or both channels are on max power. It can occur that these LEDs

will lit up now and then, this is not a problem. But if it lights up continually you need to adjust the

volume down, otherwise permanent damage to equipment might occur

5. Signal indicators.

Three green LEDs indicate the amplifiers output signal levels.

6. On/Off Switch.

For switching the amplifier on and off. Always adjust the volume down to its minimum before switching

this amplifier on.

7. Blue LCD display

Information of the operation mode and parameters.

8. LOAD 2/4/8 Ohm

Select the speaker load for the correct calculation of the output power.

5 - 30

DISPLAY

Standard indication:

Line-1: Output power of both output channels. Amplifier calculated the output power.

NOTE: Select the correct load impedance (button 8)

Calculation not 100% correct in bridge operatio

Line-2: If CLIP ON the amplifier input/output is overloaded. Reduce in that case the input level.

Line-3: Protection information.

Line-4: Tempeture of the output stage of both channels

Bargraph: Vertical bargraph in the middle of LCD display indication the output signal level of both

channels

Indication for a few seconds after actuating a volume controller:

Line-1: Operation mode STEREO, BRIDGE or PARALL

Line-2: Limiter ON or OFF

Line-3 & 4: ATTEN, attenuation of the input signals, line 4 shows the level.

Bargraph: Vertical bargraph in the middle of LCD display indication the output signal level of both

channels

Indication for a few seconds after selection the output impedance button (8):

Selected the correct output load for the calculation of the output power.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Power Dynamics 171.194 - PDA-B2000 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Power Dynamics 171.194 - PDA-B2000 Manual

Product: