628459

Polycom VVX 310 Manual

162
Zoom out
Zoom in
Previous page
1/230
Next page
Polycom VVX Business Media Phones User Guide
Polycom, Inc. 162
● Normal By default, broadcasts sent to channels 1 to 23 are considered Normal broadcasts. If two
users begin a broadcast on the same group/channel at the same time, the phone with the lower serial
number continues to transmit while the other phone enters the receiving state. By default, all phones
are configured to receive broadcasts sent to channel 1.
● Priority By default, broadcasts sent to channel 24 are considered Priority broadcasts. A Priority
broadcast interrupts Normal broadcasts or active calls. All phones receive Priority broadcasts unless
Do Not Disturb is enabled. Phones play Priority broadcasts at the phone’s current audio level.
● Emergency By default, broadcasts sent to channel 25 are considered Emergency broadcasts. An
Emergency broadcast interrupts Normal broadcasts, Priority broadcasts, and active calls and plays
out at near maximum volume even if Do Not Disturb is enabled.
Sending and Receiving PTT Broadcasts
By default, you are subscribed to Channels 1, 24, and 25. This means that you can send and receive PTT
broadcasts on Channels 1, 24, and 25.
When you end a PTT broadcast, the channel remains open and enters a 10-second waiting period. This
waiting period gives people who received the broadcast a chance to respond. If no one responds within the
waiting period, the channel closes.
Send PTT Broadcasts
You can choose a channel to broadcast on before you send a PTT broadcast, or you can hold the Talk soft
key to immediately begin broadcasting on Channel 1, the default channel.
You can change your default channel to any other channel (see Change the Default Channel). When you
change the default channel, you are automatically subscribed to the channel you selected.
While you send a broadcast, you can pick up the handset, or press the Speakerphone or Headset
key, and continue speaking. You can also press the Mute key to mute your audio so that the people
receiving your broadcast do not hear anything. This behavior is similar to a phone call.
To send a PTT broadcast:
1 Select Talk.
2 From the PTT Channels screen, select a channel.
A list is displayed with the default channel, the most recent channel you sent a broadcast on, and
other channels you can broadcast on.
3 Press and hold Talk to start the broadcast. Be sure to hold Talk throughout the entire broadcast.
A transmitting beep is played then the phone displays the channel information.
4 Begin speaking.
5 When you finish your broadcast, do one of the following:
Release Talk.
When you release Talk while sending the broadcast, the broadcast temporarily stops and enters
a 10-second waiting period. During this period, the channel remains open to give others a chance
to reply. At any time during the waiting period, you can resume your broadcast by pressing and
holding Talk. If no one broadcasts during the waiting period, the channel closes and the broadcast
ends.
… 162 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom VVX 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom VVX 310 in the language / languages: English as an attachment in your email.

The manual is 4,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info