628495
96
Zoom out
Zoom in
Previous page
1/105
Next page
F01PHANTOM*2
Toggle phantom power for
input channels 1-8.
F01PHANTOM*abcdefgh where a-h are each 0 or 1
depending on the current state of phantom power for
the corresponding input channel.
F01PHANTOM*?
Query status of phantom
power for input channels 1-
8.
F01PHANTOM*abcdefgh where a-h are each 0 or 1
depending on the current state of phantom power for
the corresponding input channel.
F01PHANTOM*11110000
Enable phantom power for
inputs 1-4 and disable
phantom power for inputs 5-
8.
F01PHANTOM*11110000
8.118. PING -- See Which Devices Are Present
When any Vortex device receives this command, it responds with a PONG status message. This is typically used
by the host program to determine the types and IDs of all linked devices. When used in this manner, wildcard
characters are usually given for the device type and ID so that all connected devices will respond.
In the following example, it is assumed that there are two EF2280's (device IDs 0 and 1), two EF2241's (device
IDs 2 and 3), two EF2211's (device IDs 4 and 5), two EF2210's (device ID's 6 and 7), and two EF2201's (device
ID's 0 and 1) linked together via EF Bus.
Example Description Status Message
***PING
Ping all connected device to determine the number, type, and ID of the connected
devices.
F00PONG
F01PONG
B02PONG
B03PONG
S04PONG
S05PONG
Q06PONG
Q07PONG
T00PONG
T01PONG
8.119. PRESETK -- Delete One or All Presets
This command kills (deletes) the specified preset. If a wildcard character (*) is used to specify the preset, then
all presets are deleted.
If an attempt is made to delete one of the factory presets (in the range 0-15), the PRESETK command will fail
and generate an ERROR#071. This is because the factory presets are read-only, thus the cannot be changed or
deleted.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it
is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there
will be a delay before an acknowledgment is returned.
Example Description Status Message
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info