628495
89
Zoom out
Zoom in
Previous page
1/105
Next page
input channels 1-8 and A-D . Each channel has five bands of parametric EQ that can be independently controlled.
For the Linkwitz-Riley filters, the slope can either be 12 or 24 (dB/Octave).For the low shelf and high shelf filters,
the minimum value for the slope parameter is 1, and the maximum value is 1.2 times the current value of the
gain parameter. See the
PEQIG command for information on the gain parameter.
This command has the same format and restrictions as the
PEQIA command except that only one parameter, the
slope, is specified instead of all the parameters. See the
PEQIA command for more information. To set the slope
parameter for an output parametric EQ filter, use the
PEQOS command. To set all the parameters for an output
parametric EQ filter, use the
PEQOA command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01PEQIS3,2,1
Set the slope of the parametric EQ on
input 3 , band 2 to 1 dB per octave.
F01PEQIS3,2,1
F01PEQISB,1,?
Query current slope setting of
parametric EQ on input B , band 1.
F01PEQISB,1,s , where s is the current setting of
the slope parameter for the parametric EQ on input
B , band 1. If the slope parameter of this filter is set
to the same value given in the example above, then
the status message will be F01PEQISB,1,1 .
8.109. PEQIT -- Set Type Parameter for Specified Parametric EQ
Input Stage
This command sets or queries the type parameter for the parametric equalizer (EQ) filters on input channels 1-8
and A-D . Each channel has five bands of parametric EQ that can be independently controlled.
The type parameter specifies what type of filter is executed for the specified band of the specified input channel.
The different filter types and their corresponding values are shown in the table below.
Filter Type Value of Type Parameter
Parametric 1
Low Shelf 2
High Shelf 3
Lowpass 4
Highpass 5
Linkwitz-Riley Lowpass 6
Linkwitz-Riley Highpass 7
This command has the same format and restrictions as the
PEQIA command except that only one parameter, the
filter type, is specified instead of all the parameters. See the
PEQIA command for more information. To set the
slope parameter for an output parametric EQ filter, use the
PEQOT command. To set all the parameters for an
output parametric EQ filter, use the
PEQOA command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info