628495
4
Zoom out
Zoom in
Previous page
1/105
Next page
8.70. LIM -- Mask Logic Input Pins
8.71.
LIN -- Assign Command to Logic Input Group
8.72.
LIP -- Set Polarity for Logic Inputs
8.73.
LO -- Query or Set Status of Logic Output Pins
8.74.
LOA -- Define Behavior for Logic Output Activated State
8.75.
LOD -- Define Behavior for Logic Output Deactivated Status
8.76.
LOEN -- Enable Automatic Logic Output Status Messages
8.77.
LOK -- Delete One or All Logic Output Pin Commands
8.78.
LOM -- Mask Logic Output Pins
8.79.
LOP -- Set Polarity for Logic Outputs
8.80.
MACROA -- Add Command to Current Macro
8.81.
MACROK -- Delete One or All Macros
8.82.
MACROL -- List All Commmands in a Macro
8.83.
MACROQ -- Execute Macro Quietly
8.84.
MACROS -- Start a New Macro
8.85.
MACROW -- Write Macro to Non-Volatile Memory
8.86.
MACROX -- Execute Macro
8.87.
METER -- Select which Signal is Displayed on the Front Panel LED Meter
8.88.
MGAIN -- Set Crosspoint Gains in Main Matrix or Submatrix
8.89.
MGATE -- Select Gated or Ungated Microphone Signal in Matrix
8.90.
MIC -- Enable Microphone Gain Stage on Inputs 1-8
8.91.
MINI -- Enable Modem Initialization String
8.92.
MINISTR -- Set Modem Initialization String
8.93.
MMUTE -- Mute Crosspoint in Main Matrix or Submatrix
8.94.
MUTEGIL -- Set Mute Status of Line Inputs as a Group
8.95.
MUTEGIM -- Set Mute Status of Microphone Inputs as a Group
8.96.
MUTEI -- Mute One or More Inputs
8.97.
MUTEO -- Mute One or More Outputs
8.98.
NC -- Enable Noise Cancellation
8.99.
NCL -- Set Noise Cancellation Attenuation
8.100.
NVINIT -- Reinitialize Non-Volatile Memory
8.101.
NVLOCK -- Lock/Unlock Non-Volatile Memory
8.102.
NVPSWD -- Change Non-Volatile Memory Password
8.103.
PEQIA -- Set All Parameters for Specified Parametric EQ Input Stage
8.104.
PEQIB -- Set Bandwidth Parameter for Specified Parametric EQ Input Stage
8.105.
PEQIE -- Set Enabled Parameter for Specified Parametric EQ Input Stage
8.106.
PEQIF -- Set Frequency Parameter for Specified Parametric EQ Input Stage
8.107.
PEQIG -- Set Gain Parameter for Specified Parametric EQ Input Stage
8.108.
PEQIS -- Set Slope Parameter for Specified Parametric EQ Input Stage
8.109.
PEQIT -- Set Type Parameter for Specified Parametric EQ Input Stage
8.110.
PEQOA -- Set All Parameters for Specified Parametric EQ Output Stage
8.111.
PEQOB -- Set Bandwidth Parameter for Specified Parametric EQ Output Stage
8.112.
PEQOE -- Set Enabled Parameter for Specified Parametric EQ Output Stage
8.113.
PEQOF -- Set Frequency Parameter for Specified Parametric EQ Output Stage
8.114.
PEQOG -- Set Gain Parameter for Specified Parametric EQ Output Stage
8.115.
PEQOS -- Set Slope Parameter for Specified Parametric EQ Output Stage
8.116.
PEQOT -- Set Type Parameter for Specified Parametric EQ Output Stage
8.117.
PHANTOM -- Enable Phantom Power on Inputs 1-8
8.118.
PING -- See Which Devices Are Present
8.119.
PRESETK -- Delete One or All Presets
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info