628483

Polycom Vortex EF2201 Manual

10
Zoom out
Zoom in
Previous page
1/85
Next page
● '1' indicates that the parameter should be turned on.
● '2' indicates that the parameter should be toggled (i.e., '0' becomes '1' and '1' becomes '0').
Parameters associated with boolean commands can be queried using the '?' character. For example, if
input T is muted, and you send ' T04MUTEIT?', the EF2201 will respond with a status message of '
T04MUTEIT1'. When a status message is generated for a boolean command, the command data will
either be a '0' or '1', since '2' is obviously not a valid state.
6.2. Integer Commands
Integer commands can take one of two types of arguments. The first argument type is absolute,
meaning that the parameter will be set to the specified number. For example, ' T04GAINIT10' means
that the gain on input T will be set to 10 dB. In this case, the device will respond with a status message
of ' T04GAINIT10'.
The second argument type is relative, meaning that the parameter will be incremented or decremented
by the specified amount. The increment character is '>' and the decrement character is '<'. For
example, ' T04GAINIT>3' increments the gain on input T by 3 dB. If the input's gain was previously
set to 6 dB, then it would now be set to 9 dB. In this case the device would respond with a status
message of ' T04GAINIT9'.
The numeric part of both the absolute and relative arguments can contain a '+' or '-' to indicate the
algebraic sign of the argument. If no sign is given, '+' is assumed.
The parameters associated with integer commands have maximum and minimum values associated
with them. If you try to set a parameter above its maximum or below its minimum, the parameter will
be set to its maximum or minimum value, respectively.
Parameters associated with integer commands can be queried using the '?' character. For example, if
input T's gain is set to 12, and you send ' T04GAINIT?', the device will respond with a status message
of ' T04GAINIT12'.
6.3. Channel Commands
A command can be a channel command in addition to being one of the other types of commands
(integer or boolean). A channel command means that the command applies to a specific input or output
channel. The channel is specified by a single character (e.g., 'T') occurring before any other payload
data.
An example of a boolean channel command is the '
AGC' (Automatic Gain Control) command. '
T04AGCT0' disables the AEC on input channel T. After sending this command, the device will respond
with a status message of ' T04AGCT0'.
An example of an integer channel command is the '
GAINI' command, which adjusts the gain on the
input channels. ' T04GAINIT12' sets the input gain of channel T to 12 dB. After sending this
command, the device will respond with a status message of ' T04GAINIT12'.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2201 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2201

Polycom Vortex EF2201 User Manual - English - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info