510620
5
Zoom out
Zoom in
Previous page
1/36
Next page
2
Installing SoundPoint
®
IP 600/601 SIP
This section provides basic installation
instructions and information for obtaining
the best performance with the Sound-
Point
®
IP 600/601 SIP phone. If you re-
quire additional information or assistance
with your new phone, please contact your
system administrator.
The SoundPoint
®
IP 600/601 SIP User
Guide includes regulatory compliance
information that your system administra-
tor should review and can also be found at
www.polycom.co
m.
Powering Options for the SoundPoint
®
IP 600/601
Both the SoundPoint
®
IP 600 and SoundPoint
®
IP 601 can be powered
from Power over Ethernet in addition to AC power sources.
For Power over Ethernet, both models will accept power over stan
-
dards-based IEEE802.3af and pre-standard Cisco Power over Ethernet
via the used or unused pairs over the Ethernet cables plugged ino the
LAN port.
For AC power source, both models are shipped with an adapter to
convert the AC voltage to the appropriate DC voltage required.
There are differences between the DC voltages required by the SoundPoint
®
IP 600 and IP 601:
Requires a 12VDC rated power adapter as
supplied in the original packaging. Power
over Ethernet under the IEEE802.3af
standard also supplies sufficient wattage
to power the SoundPoint
®
IP 600 phone
without use of the adapter above. Power
-
ing under the pre-standard Cisco Power
over Ethernet will also supply sufficient
wattage to power the SoundPoint
®
IP 600
phone.
SoundPoint
®
IP 601
Requires a 24VDC rated power adapter as
supplied in the original packaging. The
24VDC adapter supplies sufficient wattage
to power the SoundPoint
®
IP 601 phone
and up to three SoundPoint
®
IP Expansion
Modules (optional accessories). Power
over Ethernet under the IEEE802.3af
standard also supplies sufficient wattage
to power the SoundPoint
®
IP 601 phone
and up to three SoundPoint
®
IP Expansion
Modules. At time of writing, powering
under the pre-standard Cisco Power over
Ethernet will supply sufficient wattage to
power the SoundPoint
®
IP 601 phone only.
When powering from an AC voltage source,
it is important to use only that power adapter
that shipped with the appropriate phone.
Powering a SoundPoint
®
IP 600 phone from
a SoundPoint
®
IP 601 phone adapter, or
vice-versa, cannot guarantee correct operation
over all input conditions. If in doubt about
the appropriate power adapter that ships with
your unit, contact your system administrator
for futher details and/or options.
SoundPoint
®
IP 600
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Soundpoint 600 ip at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Soundpoint 600 ip in the language / languages: English as an attachment in your email.

The manual is 5,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Soundpoint 600 ip

Polycom Soundpoint 600 ip User Manual - German - 40 pages

Polycom Soundpoint 600 ip User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info