628301

Polycom RealPresence Trio Manual

81
Zoom out
Zoom in
Previous page
1/90
Next page
Polycom RealPresence Trio Solution User Guide
Polycom, Inc. 81
To change the backlight intensity:
1 Navigate to Settings > Basic > Backlight Intensity.
2 From the Backlight Intensity screen, select Backlight On Intensity.
3 From the Backlight On Intensity screen, select the intensity you want, and select Back. The
default is High.
4 From the Backlight Intensity screen, select Backlight Idle Intensity.
5 From the Backlight Idle Intensity screen, select the intensity you want, and select Back. The
default is Low.
6 From the Backlight Intensity screen, select Maximum Intensity.
7 From the Maximum Intensity screen, select Up or Down, or drag your finger along the slider, to
increase or decrease the maximum intensity the screen displays.
Change the Backlight Timeout
The backlight automatically turns on with any system activity. By setting the Backlight Timeout, you can
determine how long the system should be idle before the backlight dims to its Backlight Idle intensity. By
default, after the system is idle for 40 seconds, the backlight dims.
To change the Backlight Timeout:
1 Navigate to Settings > Basic > Backlight Timeout.
From the Backlight Timeout screen, select the number of seconds the system is idle before the backlight
dims. The default is 40 seconds.
Using Power-Saving Mode
By default, the system is set up with a power-saving mode that turns off the screen to conserve energy. The
system enters power-saving mode after it has been idle for a certain period of time. You can configure the
period of time that the system is idle before the screen turns off. You can configure different idle timeouts
for office hours and off hours, such as evenings and weekends.
During off hours, the message “Off Hours Mode” scrolls on the status bar. The system exits power-saving
mode if a system event occurs—for example, if the system has an incoming call or message, or you press
a key or tap the screen. If a screen saver is enabled, power-saving mode still occurs.
You can update the following power-saving settings:
● Office Hours When you start work and how long you’re in the office each day (see Change Your
Office Hours).
● Timeouts The period of time the system should be idle before the screen turns off (see Change
Timeouts).
Change Your Office Hours
When you update your office hours, you specify when you start, and how long you work each day. The
system is idle in during the hours outside of your office hours.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom RealPresence Trio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom RealPresence Trio in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info