Manual Polti Vaporetto Xsteam (page 9 of 12) (English)

648581

Zoom out

Zoom in

1/12

opposite direction and turn the steam request

command lever (1A) (Fig. 6).

The first time it is used, drops of water may leak

out. This is due to an imperfect thermal stabili-

sation within the flex. We therefore recommend

directing the first jet of steam onto a cloth, until

a uniform jet is obtained.

NOTE: the pressure light (E) turns on and off during

use. This indicates that the electric resistance is

operating to keep constant pressure and is therefo-

re quite normal.

ATTENTION: if pressing the steam request lever

(1A) when the appliance is still pressurised, even if

off and disconnected from the mains, steam may in

any case be released from the flexible hose. As

such, before turning the appliance off and putting it

away, please first press the lever (1A) until the

steam flow ceases.

ADJUSTMENT STEAM

Vaporetto enables the flow of steam desired to be

optimised by turning the adjustment knob (D) (Fig.

8). To increase the flow turn the dial anti-clockwise.

Turning it in a clockwise direction reduces the flow.

Here are some tips for regulating it:

• Strong steam: to remove scaling, stains, grease

and to sanitise;

• Normal steam: for carpets, rugs, glass, floors;

• Gentle steam: to steam plants, clean delicate

fabrics, wall coverings, sofas, etc.

USING THE ACCESSORIES

• To attach the extension tubes (2), floor brush (3)

and the accessories socket (4) to the handle,

simply insert one into the other and push until

you hear the click indicating that the accessory

block button is in place (1D) (Fig. 7).

• To release the accessory, just hold the button

down (1D) and separate the components (Fig. 7).

• Before using the accessories check that they

firmly connected.

ATTENTION: to connect accessories (5-6-7-8-9-

10-11-16) it is first necessary to attach the acces-

sories socket (4). Once the accessories socket (4)

is attached, connect the accessory chosen, aligning

the arrows on them (Fig. 11), then turn it clockwise

(Fig. 12).

SAFETY CAP / LACK OF WATER

This appliance is equipped with a safety cap which

prevents the boiler being opened even accidentally,

until minimum pressure is reached inside. This is

indicated by a safety peg located on the cap which,

when it comes out of the cap (Fig. A), indicates that

there is still pressure inside the appliance. When it

goes back completely into the cap (Fig. B), it indi-

cates that there is no longer pressure in the

appliance.

ATTENTION - Risk of burns:

Never force the cap open and never operate on

the safety peg if the appliance is still on and

connected to the mains or if it is still hot

Every time you want to open the safety cap, pro-

ceed as follows:

• Switch off the appliance using the ON/OFF swit-

ch (C).

• Unplug from the mains electricity (N).

• Dispense steam until it is gone, using the steam

control lever (1A) on the steam gun (1C).

• Wait a few minutes to allow the boiler to cool.

• Unscrew the safety cap (A) anticlockwise.

• Refill it by following the description in Point 1 of

the PREPARATION paragraph.

WARNING: Not complying with this procedure

can expose you to the risk of burns.

PRECAUTIONS FOR DELICATE

SURFACES

• Before treating leather, special fabrics and wood

surfaces, consult the manufacturer’s instructions

and always carry out a test on a hidden part or

on a sample of the material. Allow the steamed

part to dry to make sure that no changes in co-

lour or deformations have occurred.

• Please pay careful attention when cleaning woo-

den and treated terracotta flooring as prolonged

use of steam may damage the wax, polish or co-

lour of the surfaces to be cleaned. We therefore

Fig. BFig. A

VAPORETTO XSTEAM

ENGLISH

VAPORETTO XSTEAM - M0S10629 - 2T05:FEV 1000-950.qxd 09/07/2013 8.40 Pagina 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Xsteam in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Xsteam Manual

Product: