Manual Polti Vaporetto SV300 (page 8 of 13) (English)

648597

Zoom out

Zoom in

1/13

VAPORETTO SV300

CORRECT USE OF THE PRODUCT

This appliance is intended for domestic use as a

steam generator, in accordance with the

descriptions and instructions contained in this

manual. Please read these instructions carefully

and keep them for future reference.

Polti S.p.A. declines all liability for any dama-

ge or accident deriving from any use of this

appliance which is not in conformity with the

instructions contained in this booklet.

ATTENTION

Directive 2002/96/EC (Waste Electrical and

Electronic Equipment - WEEE): information for

users

This product complies with EU Directive

2002/96/EC.

The crossed-out wastebasket symbol

on the appliance means that at the end

of its useful lifespan, the product must

be disposed of separately from ordi-

nary household wastes.

The user is responsible for delivering the

appliance to an appropriate collection facility at

the end of its useful lifespan.

Appropriate separate collection to permit recy-

cling, treatment and environmentally compatible

disposal helps prevent negative impact on the

environment and human health and promotes

recycling of the materials making up the product.

For more information on available collection faci-

lities, contact your local waste collection service

or the shop where you bought this appliance.

IMPORTANT

Before leaving our factory all our products are

rigorously tested. This is the reason why your

Vaporetto may contain some residual water in

the tank.

PREPARATION

• Remove the appliance from the packaging,

checking that the product is whole and that all

the parts are there.

• Insert the handle into the specific opening on

the appliance (A)(Fig. 1), making sure that the

pin on the handle lines up with the hole on the

appliance (Fig. 1a).

• Unscrew the screw (B) from the appliance (A),

using an appropriate screwdriver. Connect the

appliance (A) to the brush (10) and tighten the

screw (B) (Fig. 2).

Warning: Check every so often that the

screw is tight.

• Remove the water tank (5) from the appliance

pulling it upward (Fig. 3). Unscrew the cap

with the water take-up hose and remove it

from the tank (Fig. 4).

• Fill the tank with water using the jug supplied

(Fig. 5). Water by its nature contains limesca-

le which, as time goes by, can cause pro-

blems. To protect your appliance, use demine-

ralised water.

Do not add other substances or additives to

the tank.

• Screw the cap with the water take-up hose

back on the tank and hook it back on the

appliance (Fig. 6).

• Position the cloth (11/14) under the brush (Fig.

7) and fasten it by pulling the cord (Fig. 8).

Warning: Do not use the appliance without

the cloth.

USE

• Plug the power lead (4) into a suitable socket

with an earth connection. The power indicator

light will come on (8).

• The power indicator light (8) will remain on

constantly indicating that the appliance is con-

nected to the mains.

• Wait for the pressure indicator lamp (9) to

come on. At this point the appliance is ready

for use.

• To release the brush (10) from the appliance,

put your foot on the brush (10) and at the

same time tilt the handle (1) (Fig. 10). To block

it again, just return it to the original position

(Fig. 10).

• Press the steam button (2) to dispense steam.

To stop it, release the steam button (2).

• Clean the floors by moving the brush forward

and backward.

• To clean rugs and carpets, rest the brush (with

ENGLISH

VT SV300 - M0S10993 - 1U06 - _ver7:FEV 1000-950.qxd 08/07/2014 11.14 Pagina 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto SV300 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto SV300 Manual

Product: