Manual Polti Vaporetto PRO80 (page 9 of 15) (English)

648569

Zoom out

Zoom in

1/15

ENGLISH

| 21 |

CORRECT USE OF THE PRODUCT

This appliance is intended for internal domestic use as a steam

cleaner, in accordance with the descriptions and instructions

contained in this manual. Please read these instructions

carefully and keep them. If this manual is lost, it can be

consulted and/or downloaded from the website www.polti.com.

Never leave the appliance exposed to weathering.

Correct use of the product is only as detailed in this instruction

manual. Any other use may damage the appliance and

invalidate the warranty.

INFORMATION FOR USERS

Pursuant to European Directive 2012/19/EU, regarding electric

and electronic appliances, this appliance must not be dispo-

sed of with domestic waste, but sent to an official collection

facility. This appliance complies with EU Directive 2011/65/EU

The crossed-out bin symbol on the appliance indica-

tes that, at the end of its useful lifespan, the product

must be disposed of separately from other waste.

Therefore, at the end of its life, the user must hando-

ver the appliance to an appropriate collection centre for elec-

tric and electronic waste. Proper separate waste collection to

facilitate the subsequent recycling, treatment and environ-

mentally compatible disposal of the appliance helps to pre-

vent negative effects on the environment and human health,

and promotes recycling of the materials the product is made

of. Unlawful disposal by the owner involves the application of

the administrative sanctions envisaged by current legislation.

Polti S.p.A. reserves the right to change equipment or accessory

specification without prior notice.

Before leaving our factory all our products are rigorously tested.

This is the reason why your VAPORETTO may contain some

residual water in the boiler.

WHICH WATER TO USE IN THE BOILER

This appliance has been designed to function with normal

medium tap water between 8°F and 20°F. If the tap water

contains a lot of limescale use a mix composed of 50% tap

water and 50% demineralised water which is widely available

to purchase. Do not use pure demineralised water.

Warning: check the hardness of the water at the technical office

at your local council or the local water supplier.

If you only use tap water, you can reduce the formation of

limescale by using the special Kalstop limescale product,

distributed by Polti, and available for sale at all major domestic-

appliance stores and online at www.polti.com.

Never use distilled water, rain water or water containing

additives (e.g. starch, perfumes), or water produced by other

domestic appliances, by water softeners or filter jugs.

Do not use chemical substances or detergents.

1. PREPARATION FOR USE

1.1 Open the tank closing cap (1) and fill the tank with about 1l of

water, making sure that it does not overflow.

This operation must always be carried out when the boiler has

cooled and with the power cable disconnected from the mains.

Thanks to the continuous refill system you do not need to stop the

ironing and wait for the appliance to cool down because the tank

can be filled as needed.

1.2 Replace the tank closing cap.

1.3 Only for the Pro90_Turbo model open the door of the built-

in socket and insert the built-in plug of the steam hose (2),

pressing the specific button and making sure that the hooking

pin is inserted perfectly in the specific locking hole on the

socket.

1.4 Connect the cable plug to an earthed power supply of the

correct voltage (3).

Completely unwind the power cable before plugging it into the

mains and before use, and always use the appliance with the

power cable completely unwound.

1.5 Press the boiler switch ( ) (4) which will light up together

with the “steam ready” indicator light ( ).

1.6 Wait for the “ready steam” indicator light ( ) to turn off.

The appliance is ready for use.

2. CONNECTION OF ACCESSORIES

All Vaporetto accessories can be connected directly to the

handle of the steam hose or extension tubes as follows:

• Move the locking button on the accessory to the OPEN

position (7).

• Attach the required accessory to the hand gun or to the

extension tube.

• Move the locking button back to the position CLOSED (7).

• Check that the locking button has engaged and the accessory

is fully connected.

3. STEAM ADJUSTMENT

You can optimise the steam flow by means of the steam

adjustment knob. To increase the flow, turn the knob clockwise.

Turning anti-clockwise reduces the flow. Here are some tips for

regulating it:

• Maximum level: to remove encrustation, stains, grease and

to sanitise;

• Medium level: for carpets, rugs, glass and floors;

• Minimum level: to steam plants, clean delicate fabrics, wall

coverings, sofas, etc.

WARNING: When first operating steam, there may be some

drops of water mixed with the steam due to temperature

imbalances.

Direct the first jet of steam onto a rag.

VT PRO80-PRO90 - M0S11224 - 1P07:UNICO 06/08/2015 16.04 Pagina 21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto PRO80 in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto PRO80

Polti Vaporetto PRO80 User Manual - German - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto PRO80 Manual

Product: