Manual Polti Vaporetto One (page 8 of 12) (English)

648584

Zoom out

Zoom in

1/12

VAPORETTO COMFORT - VAPORETTO ONE

ENGLISH

CORRECT USE OF THE

PRODUCT

This appliance is intended for domestic use as a

steam generator, in accordance with the descrip-

tions and instructions contained in this manual.

Please read these instructions carefully and

keep them for future reference.

Polti S.p.A. declines all liability for any dama-

ge or accident deriving from any use of this

appliance which is not in conformity with the

instructions contained in this booklet.

ATTENTION

Directive 2002/96/EC (Waste Electrical and

Electronic Equipment - WEEE): information for

users

This product complies with EU Directive

2002/96/EC.

The crossed-out wastebasket symbol

on the appliance means that at the end

of its useful lifespan, the product must

be disposed of separately from ordi-

nary household wastes.

The user is responsible for delivering the

appliance to an appropriate collection facility at

the end of its useful lifespan.

Appropriate separate collection to permit recy-

cling, treatment and environmentally compatible

disposal helps prevent negative impact on the

environment and human health and promotes

recycling of the materials making up the product.

For more information on available collection faci-

lities, contact your local waste collection service

or the shop where you bought this appliance.

IMPORTANT

Before leaving our factory all our products are

rigorously tested. Your Vaporetto may contain

some residual water in the boiler from the factory

testing.

PREPARATION FOR USE

• Unscrew the safety cap (A) (Fig.1) and fill the

boiler with 1,6 litres of water, using the jug (10)

and the funnel (9) provided for this purpose

(Fig.2).

WARNING: When filling a hot boiler, we re-

commend adding small amounts of water

to avoid the water evaporating instantly

with the risk of burning.

This appliance has been designed to work

with normal tap water.

However, since water contains limescale by

nature, which may cause scaling in the long

run, we recommend using a mixture of 50%

tap water and 50% demineralised water or

treated with water softener systems. To use

tap water only and avoid scale formation, we

recommend the addition of the special natural

scale removal agent Kalstop FP2003.

Absolutely do not use distilled water, dryer

condensate water, perfumed water, rain

water, battery water, water from air condi-

tioning systems and the like. Do not use

chemical substances or detergents.

• Screw the cap (A) back in, making sure that it

correctly tightened as far as it will go. If not,

steam could escape from the opening. In this

case turn off the appliance, unplug it from the

mains and wait for it to cool before screwing

the cap back on.

• Open the door of the one-piece socket (E);

insert the moulded plug (3) until a click is

heard (Fig.3). Make sure that it is firmly con-

nected before proceeding any further. To

release the sheath, simply press the release

keys (E1) and at the same time remove the

moulded plug (3).

• Plug the power cable (F) into a suitable

earthed outlet.

NOTE: when filling, make sure that the water

does not overflow, to avoid wetting the surface

on which your Vaporella is resting

WARNING: Never leave the filling bottle or

the funnel resting on the mouth of the boiler,

with the product connected to the power

supply, since this could cause burns.

ACCESSORIES COMPARTMENT

(H)

The smaller accessories are stored in the com-

partment (H). To access it, activate the lever (G)

while lifting the upper part of the device (Fig.4).

VT COMFORT- VT ONE - M0S09809 1U02:FEV 1000-950.qxd 20/02/2014 14.00 Pagina 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto One in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto One

Polti Vaporetto One User Manual - German - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto One Manual

Product: