Manual Polti Vaporetto Lecoaspira Program (page 20 of 35) (English)

648717

Zoom out

Zoom in

1/35

LECOASPIRA PROGRAM

ENGLISH

♦ To select a pre-set programme, press the SET key (3).

♦ When the indicator (8A) starts to flash, it is possible to select the desired programme with the UP

(4) and DOWN (5) keys.

♦ Press the OK (2) key to confirm the selection.

The boiler turns on automatically in the 1 to 3 programmes. Wait until the indicator (8B)

stay lit. This means that the steam pressure corresponds to the one necessary to use the pre-set

programme. The appliance is now ready to be used.

It will only be necessary to press the steam button (A5), except for the P0 programme which is suc-

tion only and starts by pressing the suction button (A4).

Based on the programme selected, there will be an alternating sequence of steam and suction.

In order to guarantee the maximum safety of the user, European Regulation 60335-2-54

envisages that the supply of steam must occur in a voluntary manner. Because of this, when the

programmes described were developed, it was not possible to automate the steam supply function.

PROGRAMME P1 - Rugs, Carpets

This programme combines steam and suction to wash, vacuum and sanitise rugs and carpets.

♦ Set the P1 programme described in the paragraph “Pre-set programmes”.

♦ Holding the steam button (A5) down, steam is supplied

♦ When releasing the button (A5) or after a maximum of 150 seconds, the suction starts automati-

cally to dry the treated surface.

♦ Suction stops automatically after a period of time in proportion to the time the steam was sup-

plied.

♦ If you need to restart the programme to complete cleaning the entire surface, just press the but-

ton (A5) again.

PROGRAMME P2 - Parquet / Terracotta

This programme is specifically for cleaning parquet and delicate floors. The function involves the

combined action of a delicate intermittent flow of steam with adequate suction force. Delicate sur-

faces must always be cleaned using the special parquet cloth (O3) provided, fitted onto the univer-

sal brush (C) (Fig. D).

♦ Set the P2 programme described in the paragraph “Pre-set programmes”.

♦ Holding the steam button (A5) down intermittent steam is supplied and at the same time suction

starts.

♦ Release the button (A5) to stop the steam flow, while suction will continue for a few seconds more

to dry the surface treated.

♦ If you need to restart the programme to complete cleaning the entire surface, just press the but-

ton (A5) again.

Please pay careful attention when cleaning wooden surfaces and treated terracotta floo-

ring with steam as prolonged use of steam may damage the wax, polish or colour of the surfaces

to be cleaned. We therefore recommend dispensing steam on these surfaces only for short periods

of time and suggest always using a cloth, avoiding direct steam being dispensed onto the surface.

In the case of old or particularly delicate floors, clean with cloth steamed previously, without dispen-

sing steam directly on the surface.

Before steaming surfaces, we recommend vacuuming up any hair or dust, using the

vacuum only.

NOTE

LECOASPIRA PROGRAM - M0S10133 - 1T10:Layout 1 23/10/2013 9.45 Pagina 49

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira Program in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira Program

Polti Vaporetto Lecoaspira Program User Manual - German - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira Program Manual

Product: