648714
11
Zoom out
Zoom in
Previous page
1/29
Next page
LECOASPIRA FRIENDLY
115
ENGLISH
5) SHORTAGE OF WATER IN THE BOILER
The shortage of water in the boiler will be displayed by the indicator light (C). To continue to ope-
rate, just proceed as described in the paragraph “Safety Cap”
6) SAFETY CAP
This appliance is equipped with a patented safety cap which prevents the boiler being opened
even accidentally, as long as there is minimum pressure inside. Therefore, to be able to unscrew it,
it is necessary to perform specific operations which are described below.
Every time the water is depleted, proceed as follows:
Turn off the boiler switch (B).
Discharge the remaining pressure by pressing the steam button (1C) on the handle.
Unplug from the mains electricity.
Unscrew the safety cap (J) anticlockwise.
Wait a few minutes to allow the boiler to cool.
Refill it proceeding as described in the “Operation” paragraph. When filling the boiler when it is
hot, we recommend adding small amounts of water, in order to avoid it evaporating instantly.
7) CONNECTING THE ACCESSORIES
7.1) STEAM + SUCTION EXTENSION TUBES
To connect the two extension tubes together (2) and (3) it is important to pay attention to the direc-
tion indicated by the arrows. The appliance is in fact equipped with a parking system on which it is
possible, when you have finished using them, to replace the extension tube accessory (3). Incor-
rect assembly of the two parts, (2) and (3), will not allow this feature to be used.
Then connect the two extension tubes(2) and (3) together or to the handle (1B) of the flexible hose
(1), until the blocking button (1E) hooks (fig. A). Check the strength of the connection.
To release it, just hold the button down (1E) and separate the components (fig. B).
7.2)
USE OF THE ACCESSORIES STORAGE
The accessories storage (S) allows you to fasten the tube (3) with or without the brush assembled
onto the appliance body.
To connect the tube (3) to the appliance, slide the hook located on the tube into the accessories
storage on the appliance (Fig. 9).
7.3) CONNECTING THE ACCESSORIES
All the Vaporetto Lecoaspira Friendly accessories can be connected directly to the handle (1B) or
to the extension tubes (2) or (3), previously assembled (see preceding paragraph).
To connect the specific accessories for the suction and steaming features (2-3-4-5-6): proceed as
follows:
- Couple the desired accessory to the handle, until the blocking button (1E) hooks on (Fig. A).
LECOASPIRA FRIENDLY M0S10035 1S01:Layout 1 28/03/2012 15.14 Pagina 115
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto Lecoaspira Friendly at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira Friendly in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira Friendly

Polti Vaporetto Lecoaspira Friendly User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info