648713
13
Zoom out
Zoom in
Previous page
1/21
Next page
| 30 |
7.2 Connect the universal brush (2) to the rug/carpet frame (2c).
7.3 For suction only follow the instructions in point 4.1.
7.4 For steam cleaning and suction select
Programme P3 for model , P2 for the
model , as indicated in Chapter 3.
7.5 Wait for the indicators to remain lit.
7.6 Disconnect the steam lock on the handle and hold
the steam button down to start dispensing steam.
When releasing the steam button or after a maximum of 150
seconds, the suction starts automatically to dry the treated
surface. Suction stops automatically after a period of time in
proportion to the time the steam was supplied.
If you need to restart the programme to complete cleaning of
the surface, just press the steam button again.
8. CLEANING GLASS, WINDOWS AND TILES
Make sure you have prepared the appliance
following the instructions provided in Chapter 1
and that you have selected Programme P4 for
model , P3 for the model , as
indicated in Chapter 3.
8.1 Wait for the indicators to remain lit.
This programme alternates steam and suction to remove grease
and polish the surfaces, removing smears and dissolving limescale
deposits.
8.2 Connect the nozzle for frames (7) to the handle (1) or to the
extension tubes (3) and attach the window cleaning accessory (7a).
Ensure that the steam lock on the handle is deactivated.
8.3 Press and hold the steam trigger on the handle (1) and
steam the surface abundantly to dissolve the dirt.
8.4 When releasing the steam button or after a maximum of 30
seconds, the suction starts automatically. Suction stops
automatically after a period of time in proportion to the time the
steam was supplied. In any case, it is possible to stop the
programme manually by pressing the suction button.
If you need to restart the programme to complete cleaning of
the surface, just press the steam button again.
Once the cleaning cycle is finished, it is possible to start suction
by pressing the suction button to remove any residual humidity.
The combined use of steam and suction allows the most
efficient sanitising of the surface, dissolving dirt, and eliminating
grease and germs, and above all allows drying of the surface.
9. CLEANING BEDS/MATTRESSES
Make sure that you have prepared the appliance following the
instructions provided in Chapter 1.
9.1 For suction only, connect the nozzle for frames (7) to the
handle (1) and follow the instruction indicated in point 4.1.
9.2 For steam cleaning and suction use the nozzle for frames (7)
with the cap cloth (9) attached and connect it to the handle (1)
or to the extension tubes (3).
9.3 Follow the instructions provided in points 4.1 and 4.2.
Ensure that the steam lock on the handle is deactivated.
9.4 It is possible to use the suction and steam features either
together or by alternating them, activating both as described in
the previous points.
Combined use of steam and suction allows the most efficient
sanitising of the surface, dissolving dirt and removing grease,
germs and mites; it allows brightens the colour of fibres and
dries surfaces more quickly.
9.5 For model select Programme P5, as
indicated in Chapter 2.
Wait for the indicators to remain lit.
This programme is ideal for eliminating mites, and
vacuuming hair, animal fur and dust.
Steam the surface to be treated. Releasing the
steam button or after a maximum of 60 seconds, suction starts
automatically, making it possible to dry the treated surface.
If you need to restart the programme to complete cleaning of
the surface, just press the steam button again.
In any case, it is possible to stop the programme manually by
pressing the suction button.
10. UPHOLSTERY, WALL COVERINGS, CAR
INTERIORS
Make sure that you have prepared the appliance following the
instructions provided in Chapter 1.
10.1 For suction only, connect the nozzle for frames (7) to the
handle (1) and follow the instruction indicated in point 3.1.
For safety reasons, engage the steam lock on the handle
during vacuuming.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out a
test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
FAV80
The suction speed and the quantity of steam are preset and
therefore they cannot be adjusted manually.
For safety reasons, engage the steam lock on the handle
during vacuuming.
FAV80
FAV70
WARNING: To clean glass surfaces in particularly cold seasons,
preheat the windows starting to vacuum from a distance of
about 50 cm from the surface.
FAV70FAV80
The suction speed and the quantity of steam are preset and
therefore they cannot be adjusted manually.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out a
test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
For safety reasons, engage the steam lock on the handle
during vacuuming.
ENGLISH
DEUTSCH
PRELIMINARE LECOASPIRA FAV70_80 - 2015_vers7:UNICO 04/05/2015 17.28 Pagina 30
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence

Polti Vaporetto Lecoaspira FAV80 Turbo Intelligence User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info