648712
12
Zoom out
Zoom in
Previous page
1/21
Next page
USE OF FRAMES FOR FLOORS
5. CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
Make sure that you have prepared the appliance following the
instructions provided in Chapter 1.
5.1 Connect the two extension tubes (3) to the handle (1).
5.2 For suction only, connect the universal brush (2) with the frame
w/bristles (2a) and follow the instruction indicated in point 4.1.
5.3 For steam cleaning and suction attach the frame for liquids
(2b) to the universal brush (2).
5.4 Select programme P1 for model , P0
for the model , as indicated in Chapter 3.
This programme is specifically for cleaning
parquet and delicate floors. The function involves
the combined action of an intermittent flow of
steam with adequate suction force.
5.5 Wait for the indicators to remain lit.
5.6 Disconnect the steam lock on the handle and hold the steam
button down to start dispensing steam.
Steam starts to be dispensed continuously and suction starts at
the same time. Release the steam button to stop the steam flow,
while suction will continue to dry the surface treated.
If you need to restart the programme to complete cleaning of
the surface, just press the steam button again.
The combined use of steam and suction allows the most efficient
sanitising of the surface, dissolving dirt, eliminating grease,
germs and mites, and above all allows drying of the surfaces.
In this position, it is also possible to vacuum small quantities of
liquids and dry the floor.
Once the cleaning cycle is finished, it is possible to start suction
by pressing the suction button to remove any residual humidity.
5.7 For steam cleaning only, proceed as indicated in point 4.2.
It is possible to use the abrasive action of the universal cloth
supplied (10). Attach it to the universal brush (2) before starting
to clean the surface.
6. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
Make sure that you have prepared the appliance following the
instructions provided in Chapter 1.
6.1 Connect the two extension tubes (3) to the handle (1).
6.2 For suction only, connect the universal brush (2) with the
frame w/bristles (2a) and follow the instruction indicated in
point 4.1.
6.3 For steam cleaning and suction attach the rug/carpet frame
(2c) to the universal brush (2). Attach the parquet cloth
supplied (14) to the universal brush (2).
6.4 Select programme P2 for model , P1
for the model , as indicated in Chapter 3.
This programme is specifically for cleaning
parquet and delicate floors. The function involves
the combined action of a delicate intermittent
flow of steam with adequate suction force.
6.5 Wait for the indicators to remain lit.
6.6 Disconnect the steam lock on the handle and hold the steam
button down to start dispensing steam.
Intermittent steam starts to be dispensed and suction starts at
the same time. Release the steam button to stop the steam flow,
while suction will continue for a few seconds more to dry the
surface treated.
If you need to restart the programme to complete cleaning of
the surface, just press the steam button again.
7. CLEANING RUGS AND CARPETS
Make sure that you have prepared the appliance following the
instructions provided in Chapter 1.
7.1 Connect the two extension tubes (3) to the handle.
WARNING: Before cleaning fabrics with steam, consult the
manufacturer’s instructions and always carry out a test on a
hidden part or on a sample of the material. Allow the steamed
part to dry to make sure that no changes in colour or
deformations have occurred.
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
The suction speed and the quantity of steam are preset and
therefore they cannot be adjusted manually.
FAV70
FAV80
The suction speed and the quantity of steam are preset and
therefore they cannot be adjusted manually.
For safety reasons, engage the steam lock on the handle
during vacuuming.
HARD FLOORS DELICATE FLOORS RUGS/CARPETS
BRISTLE FRAME (2a)
suction only
BRISTLE FRAME (2a)
suction only
BRISTLE FRAME (2a)
suction only
RUBBER FRAME (2b)
for steam and suction.
The universal cloth can
be used combined with
the RUGS/CARPET
FRAME (2c).
RUGS/CARPET
FRAME (2c) with
parquet cloth for
steam and suction
RUGS/CARPET
FRAME (2c) for steam
and suction
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
WARNING: For additional safety, test steam delivery on a
hidden part, leave the steamed part to dry to ensure that no
changes in colour or deformation have occurred.
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
For safety reasons, engage the steam lock on the handle
during vacuuming.
FAV80
FAV70
| 29|
ENGLISH
PRELIMINARE LECOASPIRA FAV70_80 - 2015_vers7:UNICO 04/05/2015 17.28 Pagina 29
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto Lecoaspira FAV70 Intelligence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira FAV70 Intelligence in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira FAV70 Intelligence

Polti Vaporetto Lecoaspira FAV70 Intelligence User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info