648732
13
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISH
| 23 |
13. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
If water comes out from the Iron
soleplate instead of steam
The pressure values have not been
reached
Check that the ready steam lamp is OFF indicating
that the Vaporella has reached the right pressure
Wait until the required temperature and pressure
are reached as shown by the indicator lights.
The temperature knob on the iron is
set at the minimum value.
Adjust the temperature knob on the iron to the me-
dium/maximum vaue.
First steam release. Release onto a cloth until steam comes out from
the holes on the solepate.
Steam does not come out from the
Iron soleplate
ON-OFF button and boiler button off. Make sure that the appliance is powered and that
the power ON-OFF and boiler button are on
Water tank is empty. Fill the water tank, as shown in chapter 6 .
Little steam comes from the Iron
soleplate.
The steam regulation knob is set at the
minimum value.
Increase the steam flow by adjusting the steam
regulation knob to the medium/maximum value.
The steam is dry, so is barely visible,
but is present and effective
This is normal especially in particular environmen-
tal conditions.
The appliance does not turn on. ON/OFF switch turned off.
No power.
Press the ON/OFF switch.
Check that the appliance has been disconnected
from the mains, as indicated in Section 1.
The water tank was filling, but the
steam doesn't come out.
It has not reset the lack of water. Press the steam button for least 2 second, as
shown in chapter 6
Some water drops are present on
the fabric.
The cover used on the Ironing board is
wet since it cannot withstand the
power of the steam station.
Check that the shaft is suitable (shaft with grille
that prevents condensation).
Presence of water under the
appliance.
Boiler cleaning cap screwed on
incorrectly.
Seal of the boiler cleaning cap
damaged.
Unscrew the boiler cleaning cap and screw it back on
(Chapter 9).
Take Vaporella to an authorised service centre
It was made cleaning CalcControl
but the appliance is doesn't work.
Reset function CalcControl. Follow the instructions in the point 11.9.
Should the problems persist, contact an Authorised Polti Service Centre (see www.polti.com for the up-to-date list) or
Customer Services.
preliminare VL SILENCE FRIENDLY 14.45-14.55-19.50-19.55 - M0S11301 - 1P09:UNICO 29/09/2015 12.09 Pagina 23
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporella Silence Eco Friendly 14.45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporella Silence Eco Friendly 14.45 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporella Silence Eco Friendly 14.45

Polti Vaporella Silence Eco Friendly 14.45 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info