Manual Polti Vaporella Pratica Basic (page 7 of 13) (English)

648823

Zoom out

Zoom in

1/13

VAPORELLA PRATICA - PRATICA BASIC

steam escaping from around the cap.

5a. Insert the plug of the removable supply cable

(9) into the socket on the appliance (fig. 4).

Plug the appliance into an earthed power sup-

ply of the correct voltage (fig. 5).

6a. Press the boiler switch (2) and the accessories

switch (3). The pressure indicator (5) will light

up (fig. 6).

7a. Connect the chosen accessory for the required

job to the generator, as described in the para-

graph “ACCESSORIES CONNECTION”

WARNING: Do NOT under any circumstances

put or leave the funnel in the water filling aper-

ture of the appliance when the appliance is con-

nected to the mains electricity supply. Danger of

burns!

All Vaporella accessories can be connected to the

generator (A) as described below:

• Open the cover of the built-in socket (16) (fig.A).

• Insert the one-piece plug (17) (fig.B).

Connect accessory iron to the generator as descri-

bed in paragraph “ACCESSORIES CONNEC-

TION”.

Check the manufacturer’s label on the garment,

and interpret the symbol on the label as follows:

STEAM IRONING

1b.For STEAM ironing, turn the dial (7) and set

the iron to its MAXIMUM travel on the “COT-

TON - LINEN” steam position (fig.7).

NB Set at its maximum, do NOT set

against the picture of iron on the dial (7).

Most fabric types, other than delicates can

be STEAM-ironed at this temperature,

please consult the garment label. If you want

to DRY iron, set the dial (7) to the required

temperature for the fabric as shown on the

dial.

Nb fabric indications on the dial are for

DRY ironing, for STEAM ironing set at

maximum travel as explained above.

NOTE: before starting ironing, make sure that

the iron is hot enough by checking that the light

on the iron handle has gone out (10b).

NOTE: On first usage, be sure that the conti-

nuos steam jet button (10a) is not set on.

2b. Wait for the pressure indicator light (5) to go out

(about 15 minutes). Push the steam request

button (10) on the iron to release bursts of

steam from the holes on the soleplate. Release

the button and the steam will stop (fig. 8).

NOTE: during initial operation of the iron, a few

drops of water mixed with steam may come out

of the soleplate until the temperature stabilises.

It is advisable to direct the first jets of steam

onto an old cloth until a uniform stable jet of

steam is obtained.

3b. In order to have a continuous steam jet, move

the continuos steam jet button (10a) forwards.

Steam will keep on coming out, even if you re-

lease the button. To stop the flow, move the

continuos steam jet button (10a) backwards

(fig. 9).

4b. By turning the steam control (6) you can vary

the amount of steam according to the type of

textile to be ironed (more or less delicate). You

can use this control to increase the steam flow

by turning it in an anti-clockwise direction. Tur-

ning the control in a clockwise direction redu-

ces the steam flow (fig. 10).

5b. When there is no more steam to release, the

water level warning light will come on (4). See

the “Patented Safety Cap / Water out” para-

graph to refill the boiler.

6b. The appliance is equipped with a rigid iron rest

mat (11) (fig.11) which can be removed and put

elsewhere if required.

Steam ironing allowed--set the dial to its

MAXIMUM travel at the end of the 3

dots symbol on your Polti iron

Steam ironing allowed--set the dial to

its MAXIMUM travel at the end of the

THREE (nb THREE, not two) dots sym-

bol on your Polti iron

DRY IRON only, with iron dial set at one

dot. N.B. NEVER CALL FOR STEAM

BY PRESSING STEAM REQUEST

BUTTON when DRY ironing. See spe-

cial instructions for DRY ironing in the

instruction book.

DO NOT IRON. Neither steam nor dry

ironing allowed.

vl pratica_pratica basic m0s07292 1m04.qxp 16/06/2006 12.32 Pagina 37

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporella Pratica Basic in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporella Pratica Basic

Polti Vaporella Pratica Basic User Manual - German - 11 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporella Pratica Basic Manual

Product: