Manual Polti Vaporella 505 Pro (page 13 of 18) (English)

648725

Zoom out

Zoom in

1/18

2. IRON TEMPERATURE ADJUST-

MENT

Before ironing an item of clothing, always

check the symbols on its label, for the instruc-

tions provided by the manufacturer.

Check, based on the following table, the most

appropriate type of ironing and select the

most appropriate temperature on the iron (8):

3. STEAM IRONING

3.1 Make sure that chapter 1 has been comple-

ted and regulate the temperature of the iron

(9) as described in chapter 2

3.2 Wait for the “Steam Ready” indicator light

(5)(6) and “Iron Heating” indicator light (7) to

turn off.

3.3 Only for Vaporella 515 Pro Adjust the

steam flow by turning the knob in a clockwise

direction to increase the jet of steam (9). Tur-

ning it in an anticlockwise direction reduces

the steam flow. We recommend maximum for

heavy fabrics such as jeans and linen, medium

for cotton and minimum for lightweight or de-

licate fabrics.

3.4 Press the steam button (10) on the iron to

make steam come out of the holes on the pla-

te. Releasing the button, the flow stops. Pro-

ceed to iron the garments.

3.5 To have a continuous jet of steam move

the button forward (11). The steam will conti-

nue to come out even when the button is re-

leased. To interrupt the supply, move the but-

ton backward (11).

4. VERTICAL IRONING

It is possible to use the iron vertically to remo-

ve creases from fabrics and/or to freshen up

the fibres, eliminating possible residual

odours.

Hold the iron vertically, push the steam button

(10) and touch the fabric slightly with the so-

leplate, if the type of fabrics allows it.

5. DRY IRONING

For dry ironing, adjust the temperature of the

iron as described in Chapter 2. When dry iro-

ning, be careful not to press the steam button

since water could leak from the plate.

6. OUT OF WATER

When the appliance does not release steam

anymore, this means there is no more water in

the boiler.

ATTENTION: Do not place the hot iron on

any surface. Vaporella is equipped with an

iron rest mat with soft non-slip inserts desi-

gned to resist high temperatures.

The indicator lights “Iron heating” and “Steam

ready” turn on and off during use. This indica-

tes that the electrical resistor has started to

work to keep the pressure of the boiler

steady. This is a normal occurrence, and it is

therefore possible to continue ironing.

High temperature – cotton, linen:

Set the iron temperature adjustment knob

to the position

•••

Medium temperature – wool, silk:

Set the iron temperature adjustment knob

to the position

••

Low temperature – synthetic, acrylic, ny-

lon, polyester:

Set the iron temperature adjustment knob

to the position

•

- Do not iron

- Steam ironing and steam treatment not

allowed

When first using the steam, there may be so-

me drops of water leaking out of the plate,

this is due to imperfect thermal stabilization.

We therefore recommend that the first jet of

steam be directed onto a cloth (clean rag).

Divide the laundry according to the symbols

on the garment labels or according to the

kind of fabric. Always start ironing with the

garments that require the lowest tempera-

ture, in order to reduce the waiting times

and avoid the risk of burning the fabrics.

ATTENTION: For low temperature we do not

recommend the use of steam since water

could come out from the holes on the sole-

plate. For medium temperature alternate the

use of steam and dry ironing to avoid water

leaking from the holes on the soleplate.

ENGLISH

| 25 |

PRELIMINARE VL 505 PRO - 507 PRO - 515 PRO - M0S10674 - 2PP11_7:FEV 1000-950.qxd 10/12/2015 14.25 Pag

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporella 505 Pro in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporella 505 Pro

Polti Vaporella 505 Pro User Manual - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporella 505 Pro Manual

Product: