648725
10
Zoom out
Zoom in
Previous page
1/18
Next page
surfaces.
To continue steam delivery, return the switch to its original
position.
Iron only on supports that are heat resistant and which allow
the steam to permeate.
When placing the iron on its stand, make sure that the surface
on which the stand is placed, is stable.
If the iron rest mat needs to be replaced, only use original
spare parts.
The iron must be used and rested on a stable surface.
Do not place the hot appliance on heat-sensitive surfaces.
If ironing whilst sitting down, take care to ensure that the jet
of steam is not angled towards your legs. Steam can scald.
Before connecting the appliance to the current, ensure that
the continuous steam jet button is not pressed.
Never leave the iron unattended when it is plugged in.
Always use the appliance with the safety cap supplied or an
original replacement part. Using non-original Polti safety caps
can lead to accidents.
When accessing the pressurised boiler (removing the cap, fil-
ling up), ensure that the appliance has been switched off at
the power switch and disconnected from the mains for at
least two hour, allowing it to cool. There is a risk of accidents
while the boiler is a switched on/hot and pressurised.
Do not connect the appliance with the safety cap removed.
Carefully tighten the safety cap before plugging in and tur-
ning on the appliance.
Before turning on the appliance, check that there is nothing
blocking the mouth of the boiler (filler bottle, funnel, or other
objects), and that the safety cap is closed.
Check that the safety cap is correctly tightened; if steam is
escaping from the cap, switch off the boiler, unplug the
power cable, wait for two hour for the appliance to cool, and
then unscrew. Check the condition of the safety cap and seal.
If the cap is in good condition, screw it back on completely. If
ENGLISH
| 22 |
PRELIMINARE VL 505 PRO - 507 PRO - 515 PRO - M0S10674 - 2PP11_7:FEV 1000-950.qxd 10/12/2015 14.25 Pag
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporella 505 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporella 505 Pro in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporella 505 Pro

Polti Vaporella 505 Pro User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info