648707

Polti Unico MCV80 Manual

19
Zoom out
Zoom in
Previous page
1/26
Next page
ENGLISH
| 37 |
STEAM ONLY FUNCTION
For steam cleaning only, make sure that Chapter 2 has been
performed.
It is possible to adjust the intensity of the steam by using the +/-
buttons (see Chapter 4); for this type of surface we recommend
the minimum level of steam.
Press and hold the steam trigger on the handle and direct the
jet onto a cloth.
Use the steamed cloth to clean the surface, avoiding prolonged
use on the same spot.
14. OTHER GENERAL USES
14.1 BRIGHTENING UP CURTAINS AND DRAPES
BRIGHTENING UP CURTAINS AND DRAPES
Mites and dust can be removed from curtains and drapes by
steaming the fabric directly from the handle. The steam is able
to remove odours and brighten up colours, allowing the fabric
to be washed less frequently.
For this surface, set the steam to the minimum level.
14.2 REMOVING STAINS FROM CARPETS AND UPHOLSTERY
Connect the concentrator accessory without the bristly round brush;
direct the steam directly onto the stain with the greatest angle
possible (never vertically to the surface to be cleaned) and place a
cloth beyond the stain to collect the dirt that has been “blown” away
by the steam pressure.
For this surface, set the steam to the minimum level.
Connect the suction nozzle to the concentrator accessory and
activate the suction function to vacuum the removed dirt remained
on the floor.
14.3 TAKING CARE OF PLANTS AND HUMIDIFYING ROOMS
To care for your house plants, remove the dust from the leaves
by steaming them directly from the handle. Adjust the steam
to the minimum level and vacuum at a distance of 50 cm. Plants
breathe better and will be cleaner and brighter. Furthermore,
you can also use the steam to refresh spaces, especially those
frequented by smokers.
15. OUT OF WATER
When the tank is out of water, the indicator light on the control
panel (tap symbol) will turn on and you will hear a beep. To
continue with steam cleaning, simply open the tank door and
add water (10).
16. GENERAL MAINTENANCE
Ensure that the appliance is switched off and disconnected from
the mains (24).
To clean the outside of the appliance, only use a damp cloth
and tap water.
All accessories can be cleaned using running water, ensuring
they are completely dry before the next use.
Do not use detergents of any type.
The cloths provided can be washed by following the
instructions included on the label.
17. CLEANING THE DIRT COLLECTOR
(ordinary maintenance)
17.1 Ensure that the appliance is switched off and disconnected
from the mains (24).
17.2 Disconnect the dirt collector and remove it (25).
17.3 Hold the upper handle and turn clockwise (26).
17.4 Slowly remove the filter unit, pulling upwards and empty
the collector into an appropriate container (26-27).
17.5 Wash the collector and the filter unit using running water only
(26-27). Shake to remove excess water. This operation is
recommended in particular if liquids are vacuumed and/or the
appliance has been used in combined steam / vacuum mode
to dry the surfaces.
17.6 Reassemble all the parts following the procedure in reverse
order (30). The UNICO filter unit does not need to be dried; it
is ready for use immediately, avoiding unnecessary waiting time.
However, before replacing, we advise quickly drying the filter
and the collector with a cloth to avoid unpleasant odours
forming.
Empty the dirt collector each time the MAX level is reached and
after every use.
We recommend emptying the collector after every use, before
storing the appliance to avoid unpleasant odours forming.
18. CLEANING THE FILTERS
(extraordinary maintenance)
18.1 Ensure that the appliance is switched off and disconnected
from the mains 24.
18.2 Release and remove the dirt collector (25).
18.3 Lower the handle of the filter unit (31) and turn the cap until
(32) the two triangles coincide (33).
WARNING: Should foam form inside the dirt collector (usually
due to detergent being present on the surface), immediately
empty and clean fully as detailed in Chapters 17, 18 and 22.
To vacuum surfaces it is not necessary to fill the tank, simply
turn the boiler off.
WARNING: Steam.
Risk of scalding!
WARNING: Before cleaning the surface, always do a test on a
hidden part and see how it reacts to the application of steam.
WARNING: Before cleaning the surface, always do a test on a
hidden part and see how it reacts to the application of steam.
WARNING: Do not direct the steam jet directly onto surfaces.
UNICO MCV80-MCV85 - M0S11431 - 1Q09:UNICO 30/08/2016 16.17 Pagina 37
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Unico MCV80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Unico MCV80 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info