649053
15
Zoom out
Zoom in
Previous page
1/20
Next page
ENGLISH
| 29 |
10. OTHER GENERAL USES
10.1 BRIGHTENING UP CURTAINS AND DRAPES
Vacuuming the fabric just using the handle can remove mites
and dust from curtains and drapes. The steam is able to remove
odours and brighten up colours, allowing the fabric to be
washed less frequently.
For this surface, set the steam to the minimum level.
10.2 REMOVING STAINS FROM CARPETS AND UPHOLSTERY
Connect the concentrator accessory without the bristly round brush;
direct the steam directly onto the stain with the greatest angle
possible (never vertically to the surface to be cleaned) and place a
cloth beyond the stain to collect the dirt that has been “blown” away
by the steam pressure.
For this surface, set the steam to the minimum level.
Connect the suction nozzle to the concentrator accessory and
activate the suction function to vacuum the removed dirt remained
on the floor.
10.3 TAKING CARE OF PLANTS AND HUMIDIFYING ROOMS
To take care of your house plants, remove the dust from the
leaves using just the handle, vacuuming the surface: adjust the
steam to the minimum level and vacuum at a distance of 50
cm. Plants breathe better and will be cleaner and brighter.
Furthermore, you can also use the steam to refresh spaces,
especially those frequented by smokers.
11. OUT OF WATER
When the tank is out of water, the indicator light on the control
panel (tap symbol) will turn on and you will hear a beep. To
continue with steam cleaning, simply open the tank door and
add water.
12. GENERAL MAINTENANCE
To clean the outside of the appliance, only use a damp cloth
and tap water.
All accessories can be cleaned using running water, ensuring
they are completely dry before the next use.
Do not use detergents of any type.
13. CLEANING THE DIRT COLLECTOR
(ordinary maintenance)
13.1 Ensure that the appliance is switched off and disconnected
from the mains.
13.2 Disconnect the dirt collector and remove it.
13.3 Hold the upper handle and turn clockwise.
13.4 Slowly remove the filter unit, pulling upwards and empty
the collector into an appropriate container.
13.5 Wash the collector and the filter unit using running water
only. Shake to remove excess water. This action is advisable
especially when liquids are vacuumed and/or when steam is used.
13.6 Reassemble all the parts following the procedure in reverse
order. The UNICO filter unit does not need to be dried; it is
ready for use immediately, avoiding unnecessary waiting time.
However, before replacing, we advise quickly drying the filter
and the collector with a cloth to avoid unpleasant odours
forming.
Empty the dirt collector each time the MAX level is reached
and after every use.
We recommend emptying the collector after every use, before
storing the appliance to avoid unpleasant odours forming.
14. CLEANING THE FILTERS
(extraordinary maintenance)
14.1 Ensure that the appliance is switched off and disconnected
from the mains.
14.2 Release and remove the dirt collector.
14.3 Lower the handle of the filter unit and turn the cap until
the two triangles coincide.
14.4 Lift the cap pulling upwards and remove the mesh filter.
14.5 Hold the handle of the multi-cyclonic unit and pull upwards.
14.6 Wash the mesh filter and the multi-cyclonic unit using
running water only.
14.7 Wring out the filter and reassemble all the parts, following
the procedure in reverse order, ensuring that the mesh part of
the filter is facing upwards.
14.8 Remove the HEPA filter from the body of the appliance,
disconnecting it from the appropriate lever.
14.9 Rinse the HEPA filter using running water only and shake
gently to remove any excess dirt or water residue; before
replacing the filter in the appliance, leave to dry naturally away
from direct light and heat for at least 24 hours.
The filters should be fully cleaned approximately twice per year.
Should the appliance be used frequently for vacuuming liquid
dirt, repeat the operation more frequently.
WARNING: Check the filters during cleaning. Replace the
filters when visibly damaged.
WARNING: Should foam form inside the dirt collector (usually
due to detergent being present on the surface), immediately
empty and clean fully as detailed in Chapters 13, 14 and 17.
To vacuum surfaces it is not necessary to fill the tank, simply
turn the boiler off.
WARNING: Steam.
Risk of scalding!
WARNING: Before cleaning the surface, always do a test on a
hidden part and see how it reacts to the application of steam.
Manuale UNICO MCV50-MCV70 VERSIONE 16-09-14_vers7:UNICO 22/09/2014 16.19 Pagina 29
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti UNICO MCV70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti UNICO MCV70 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti UNICO MCV70

Polti UNICO MCV70 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info