649053

Polti UNICO MCV70 Manual

12
Zoom out
Zoom in
Previous page
1/20
Next page
1.8 Depending on the surface to be cleaned (rugs/carpets,
wooden floors and delicate flooring, or hard floors), and the
function you wish to use (vacuum, steam, solid/liquid vacuum,
vacuum and steam together, with or without cloth), choose the
position (A-B-C) of the innovative universal brush, pressing the
relative pedal marked as per the label on the appliance, shown
below and detailed in the following chapters.
If you wish to only use suction, it is possible to remove the steam
hose by unlocking the automatic buttons from the vacuum tube
and the two connectors at the ends, and it is not necessary to
fill the water tank. Without the steam hose, it is impossible to
activate the steam, even with the boiler switched on.
There are two cloths supplied, one with buffers and the other
for hard-to-reach areas.
For the MCV70 model we recommend using the special
transport grip to move the appliance more easily.
The transport grip (optional for the MCV50 model) can be
purchased at all major household-appliance shops or online at
www.polti.com.
Do not use the transport grip to lift the appliance.
2. CLEANING HARD FLOORS
(tiles, ceramic surfaces, etc.)
2.1 For suction alone, set the innovative universal brush to
position C (bristle inserts) pressing the pedal (which ensures
that the holder with cloth is not
attached to the brush).
Press the suction button on the appliance and proceed with
cleaning.
It is possible to adjust the suction power by moving the cursor
on the handle.
2.2 For steam cleaning and suction, set the universal brush to
position B (rubber inserts) and ensure that the holder with cloth
is not
attached to the brush. Ensure that points 1.5 and 1.6 have
been carried out. Turn on the boiler using the ON button and
adjust the strength of the steam using the +/- buttons (to turn off
the boiler hold the OFF button for a few seconds); for this type of
surface, we recommend the maximum steam level. The steam
indicator light will start flashing and continue until the correct
temperature is reached.
2.3 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the suction button, respectively.
2.4 Alternatively, select program 1, pressing the PROGRAM
button (see Chapter 5).
The combined use of steam and suction allows the most
efficient sanitising of the surface, dissolving dirt, eliminating
grease, germs and mites, and above all allows drying of the
surfaces.
In this position, it is also possible to vacuum small quantities of
liquids and dry the floor.
2.5 To clean using steam alone, it is possible to use the abrasive
action of the cloths supplied, attaching it to the special holder.
Position the holder on the floor and position the universal brush
above it in position A (no insert), apply slight pressure until it
clicks, locking into place.
3. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
3.1 For suction alone, set the innovative universal brush to
position C (bristle inserts) pressing the pedal (which ensures
that the holder with cloth is not
attached to the brush).
3.2 Press the suction button on the appliance and proceed with
cleaning.
It is possible to adjust the suction power by moving the cursor
on the handle.
3.3 For steam cleaning and suction, set the universal brush to
position A (no insert) and ensure that points 1.5 to 1.6 have been
carried out. Attach the cloth supplied to the relative holder;
place the holder with cloth on the ground and position the
brush above, applying slight pressure until a click is heard as it
locks into place. Turn the boiler on using the ON button and
AAA
CAA
BBC A
Only use the cloth and special holder with the brush in position A.
Before removing the holder with cloth from the brush, wait a
few minutes to allow the cloth to cool. Never use the holder
without a cloth.
For safety reasons, apply the steam lock on the handle during
vacuuming.
WARNING: When first operating steam, there may be some
drops of water mixed with the steam due to temperature
imbalances.
Direct the first jet of steam onto a rag.
WARNING: The level of dirt vacuumed should not exceed the
MAX indicator on the dirt collector; this indicator refers to both
solid and liquid dirt. Upon reaching the maximum level, see
Chapter 13.
To avoid any dirt in the dirt collector causing bad smells
(especially where liquids are vacuumed and/or steam is used),
we recommend emptying and cleaning after every use
according to the methods described in Chapter 13.
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
For safety reasons, apply the steam lock on the handle during
vacuuming.
| 26 |
ENGLISH
Manuale UNICO MCV50-MCV70 VERSIONE 16-09-14_vers7:UNICO 22/09/2014 16.19 Pagina 26
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti UNICO MCV70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti UNICO MCV70 in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti UNICO MCV70

Polti UNICO MCV70 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info