648708

Polti Unico MCV20 Manual

14
Zoom out
Zoom in
Previous page
1/21
Next page
ENGLISH
| 30|
steam trigger on the handle, and the ON/vacuum button,
respectively.
3. CLEANING DELICATE FLOORS
(wooden, stone, waxed surfaces, etc.)
3.1 For suction alone, set the innovative universal brush to
position C (bristle inserts) pressing the pedal (which ensures
that the holder with cloth is not
attached to the brush).
3.2 Press the ON/vacuum button on the appliance and proceed
with vacuuming the floor.
It is possible to adjust the suction power by moving the cursor
on the handle.
3.3 For steam cleaning and suction, set the universal brush to
position A (no insert) and ensure that points 1.5 to 1.6 have been
carried out. Attach the cloth supplied to the relative holder;
place the holder with cloth on the ground and position the
brush above, applying slight pressure until a click is heard as it
locks into place. Switch on the boiler using the ON/steam
button. Wait for the steam indicator light (upper green) to turn
off before dispensing steam. Adjust the strength of the steam
by turning the adjustment knob (to switch off the boiler press the
ON/steam button again). For this type of surface use the
minimum steam level.
3.4 Deactivate the steam lock and continue with the steam
delivery pressing the steam trigger on the handle, together with
suction, pressing the ON/vacuum button. The cloth will remove
the dirt thanks to its abrasive action and will sanitise the surface.
4. CLEANING RUGS AND CARPETS
4.1 For suction alone, set the innovative universal brush to
position A (no insert), pressing the pedal.
4.2 Press the ON/vacuum button on the appliance and proceed
with vacuuming of the surface.
It is possible to adjust the suction power by moving the cursor
on the handle.
4.3 For steam cleaning and suction, set the universal brush to
position A (no insert) and ensure that points 1.5 to 1.6 have been
carried out. Switch on the boiler using the ON/steam button.
Wait for the steam indicator light (upper green) to turn off
before dispensing steam. Adjust the strength of the steam by
turning the adjustment knob (to switch off the boiler press the
ON/steam button again). For this type of surface we
recommend using the medium steam level.
4.4 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the ON/vacuum button, respectively.
Combined use of steam and suction allows the most efficient
sanitising of the surface, dissolving dirt and removing grease,
germs and mites; it also brightens the colour of fibres and dries
surfaces more quickly.
5. CLEANING GLASS, WINDOWS AND TILES
5.1 For steam cleaning, ensure that points 1.5 and 1.6 have been
carried out. Turn on the boiler by pressing the ON/steam
button. Wait for the steam indicator light (upper green) to turn
off before dispensing steam. Adjust the strength of the steam
by turning the adjustment knob (to switch off the boiler press the
ON/steam button again). For this type of surface we
For safety reasons, engage the steam lock on the handle
during vacuuming.
Before removing the holder with cloth from the brush, wait a
few minutes to allow the cloth to cool. Never use the holder
without a cloth.
To avoid any dirt in the dirt collector causing bad smells
(especially where liquids are vacuumed and/or steam is used),
we recommend emptying and cleaning after every use
according to the methods described in Chapter 13.
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
For safety reasons, engage the steam lock on the handle
during vacuuming.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out
a test on a hidden part or on a sample of the material. Allow
the steamed part to dry to make sure that no changes in
colour or deformations have occurred.
To avoid any dirt in the dirt collector causing bad smells
(especially where liquids are vacuumed and/or steam is used),
we recommend emptying and cleaning after every use
according to the methods described in Chapter 13.
To avoid any dirt in the dirt collector causing bad smells
(especially where liquids are vacuumed and/or steam is used),
we recommend emptying and cleaning after every use
according to the methods described in Chapter 13.
WARNING: To clean glass surfaces in particularly cold seasons,
preheat the windows starting to vacuum from a distance of
about 50 cm from the surface.
WARNING: For additional safety, test steam delivery on a
hidden part, leave the steamed part to dry to ensure that no
changes in colour or deformation have occurred.
Before removing the holder with cloth from the brush, wait a
few minutes to allow the cloth to cool. Never use the holder
without a cloth.
Manuale UNICO MCV20 VERSIONE 05-09-14_vers7:UNICO 22/09/2014 15.51 Pagina 30
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Unico MCV20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Unico MCV20 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Unico MCV20

Polti Unico MCV20 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info