648795

Polti Sani System Polti Check Manual

8
Zoom out
Zoom in
Previous page
1/13
Next page
“AREA” The user is responsible for coding of
the area, which is not managed by the prod-
uct software. This field is free and optional.
It is possible to assign a number to each area
to be treated, so that the operations carried
out can be traced. If the AREA number is en-
tered, it will be shown on the slip.
Enter the number of the area (from 01 to 99)
or, if you do not wish to code the work area,
enter 00.
In both cases, press OK to confirm.
To delete an incorrectly entered area number,
use the CANC key. Furthermore, the CANC
key can also be used to return to the previous
menu for selecting the programme.
Once these parameters have been entered,
the following information will appear on the di-
splay:
Prog:__ Indicates the programme that has
been selected.
TIME:___ indicates the time left, in seconds,
depending on the chosen programme.
P
P
R
R
O
O
G
G
R
R
A
A
M
M
M
M
E
E
S
S
PROGRAMME 00
Programme 00 is a free programme by
means of which the user can produce steam
for a maximum of 3600 seconds.
After 3 seconds of delivery, the prompt
“PRINT?” will appear on the display and the
signalling lamp (E) will light up.
From this moment on, it will be possible to
print a slip containing the data referred to the
sanitising cycle carried out.
Printing is started:
• by pressing OK
• upon timeout (after 3600 seconds of actual
delivery)
• on LOGGING OUT.
If you press the CANC key, the slip will not be
printed, the information will be stored and
when you LOG OUT, all the information con-
cerning the work carried out will be printed on
a single summary slip.
PROGRAMMES 01 / 02 / 03
Programmes 01, 02 and 03 are predefined
programmes that differ in terms of the actual
delivery time that is pre-set:
01 - 180 seconds + 60 seconds (extra time)
02 - 360 seconds + 120 seconds (extra time)
03 - 600 seconds + 180 seconds (extra time)
The length of the programme is expressed as
the actual time of delivery of steam.
At the end of the minimum time provided for
each programme (programme 01 - 180 se-
conds; 02 - 360 seconds; 03 - 600 seconds)
the signalling lamp (E) will light up, an acou-
stic signal will sound and the prompt
“PRINT?”. will appear on the display.
At this point it twill be possible to end the ope-
rations and to print the slip by pressing OK.
It is in any case possible to continue delive-
ring steam for an extra period of time that de-
pends on the programme that was selected
(programme 01 - 60 seconds; 02 - 120 se-
conds; 03 - 180 seconds). It is possible to end
the operations and print the slip by pressing
OK even if the extra time is not completed.
Whenever the prompt “PRINT?” appears on
the display, two options are available:
• If you press OK, the slip containing the
information about the programme that has
just ended will be printed.
• If you press CANC, the slip will not be prin-
ted, the information will be stored and when
you LOG OUT, all the information concer-
ning the work carried out will be printed on
a single summary slip.
The slip will indicate “PROG: OK” if the cycle
has been carried out correctly, or “PROG:
NOT VALID” if the cycle was broken off by
the user LOGGING OUT or in case of mal-
functioning of the device.
E
E
N
N
D
D
O
O
F
F
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
S
S
/
/
L
L
O
O
G
G
O
O
U
U
T
T
Once the sanitising operations have been
completed, you must LOG OUT. To LOG
OUT, hold the CANC key down for 4 seconds.
At this point a summary of the operations
from the LOGIN to the LOGOUT will be prin-
ted.
E
E
N
N
G
G
L
L
I
I
S
S
H
H
SANI SYSTEM CHECK
46
SANI SYSTEM CHECK M0S08111 2O08:A5 31/07/2008 11.27 Pagina 46
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Sani System Polti Check at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Sani System Polti Check in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info