648805

Polti Sani System Express Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
HPMED”.
Switch on the SANI SYSTEM POLTI machine
following the manufacturer’s instructions. Once
the system is ready, distribute the steam and
HPMED sanitising agent. Mixed with the steam,
the product will normally dry within 30 seconds
to one minute, depending on the environmental
conditions.
Warnings: Keep out of the reach of children. Do
not ingest. In case of contact with eyes, rinse
with plenty of water and seek medical advice.
A safety data sheet is available for professional
users.
For professional use only.
HPMED is a cleaning sanitising product for hard
surfaces.
Contains <5% non-ionic surfactant. (EEC Reg.
648/2004)
P
P
R
R
E
E
P
P
A
A
R
R
I
I
N
N
G
G
F
F
O
O
R
R
U
U
S
S
E
E
• Fit the carry handle (F) as shown in fig.1,
tightening the two handle locking ring nuts (G)
to secure it in place.The height of the handle
can be adjusted; the maximum extension is
reached when the end of run “clack” sound is
heard; with further motion, the handle can be
removed.
• Unscrew the tank cap (B) and fill the tank with
ordinary tap water, using the funnel provided
(U).
Disconnect the appliance from the mains be-
fore filling.
• Insert the power plug (H) into a suitable elec-
trical socket with an earth connection.
• Fit the disposable bottle into the delivery de-
vice following the instructions in paragraph
“DISPOSABLE BOTTLE OF HPMED”.
D
D
I
I
S
S
P
P
O
O
S
S
A
A
B
B
L
L
E
E
B
B
O
O
T
T
T
T
L
L
E
E
H
H
P
P
M
M
E
E
D
D
• Unscrew the cap of the disposable bottle.
• Screw the disposable bottle (Q) to SANI SYS-
TEM POLTI delivery device (fig.2).
As soon as the level of HPMED contained in the
disposable bottle drops below the low level indi-
cated on the label, replace with a new bottle.
Once the disposable bottle has been opened
and fitted onto the delivery device, sanitising ef-
ficiency is guaranteed for 7 days.
If the bottle has been only partly used after this
period of time, it is in any case advisable, there-
fore, to remove it and replace it with a new one.
Do not refill the disposable bottle.
To carry out correct sanitising, we recommend
reading the instructions for using SANI SYSTEM
POLTI carefully.
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
U
U
S
S
E
E
• Press the main switch (A): the boiler heating
indicator lamp (C) will come on.
• Wait for the heating indicator lamp (C) to go
out (about 5 - 10 minutes). This indicates that
the appliance is ready to be used.
• To dispense steam, push back the safety lever
(N) and at the same time press the steam de-
livery button (M) (fig.3).
While steam is being dispensed with button
(M) depressed, release the safety lever
(N).The delivery lamp (I) will switch off when
the heating coil inside the nozzle reaches the
working temperature.
Note:
• When the appliance is in use, the boiler heat-
ing indicator (C) and the delivery lamp (N)
light up and turn off. This indicates that the
electric heating coils have switched on in or-
der to keep the pressure in the boiler and the
temperature in the delivery nozzle up. This is
a normal occurrence, and it is therefore possi-
ble to continue the sanitising operations.
• BEFORE STARTING TO SANITISE, IT IS
ADVISABLE TO DIRECT THE FIRST JET
OF STEAM ONTO A CLOTH OR DOWN-
WARDS FOR APPROXIMATELY 30 SEC-
ONDS WITHOUT HOOKING UP THE FIT-
TING FOR THE DISPOSABLE BOTTLE (Q).
THIS WILL ENABLE THE OPTIMUM TEM-
PERATURE AND PRESSURE TO BE
REACHED.
T
T
I
I
P
P
S
S
F
F
O
O
R
R
U
U
S
S
E
E
Before treating delicate or special surfaces with
the SANI SYSTEM POLTI POLTI sanitising sys-
tem, consult the manufacturer’s instructions and
carry out a test on a hidden part of the surface or
on a sample of the material.
Allow the sanitised part to dry to make sure that
no changes in colour or deformations have oc-
curred.
Make sure that the surface to be treated is
SANI SYSTEM EXPRESS
29
E
E
N
N
G
G
L
L
I
I
S
S
H
H
SANI SYSTEM EXPRESS M0S09441 1Q10_MODIFICATO_7:A5 19/05/2011 11.03 Pagina 29
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Sani System Express at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Sani System Express in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info