Manual Polti MONDIAL VAP 5000 (page 15 of 19) (English)

648839

Zoom out

Zoom in

1/19

ENGLISH

Before attempting any maintenance operation, be sure to always

disconnect the appliance from the mains.

Unhook the two closing levers (27), lift the cover (15) by turning it

(fig.2) and gently lean it to the body. Unscrew the 4 wheels which are

under the cover by using a coin (fig. 12), take out the pleated filter

(32) from its storage department and clean it with a hard bristle

brush. If the filter is still not clean, rinse it with water and leave it to

dry (fig.13). If the filter is damaged, replace it so as not to

compromise the performance of the machine. To go on working, put

the filter back in its place by making the reverse operation from the

previous one. The life of the filter is of about 100 hours.

(to be done after every cleaning operation)

Unhook the two closing levers of the dirt container cover, lift the cover (15) (fig.2) by turning it.

Take out the container from the machine and empty it. Before putting it back, rinse it, check that

the floater has no obstructions, if so, clean it.

(to be done after every cleaning operation)

Unhook the two closing levers of the dirt container cover, lift the cover (15) by turning it.

Take out the coil filter and rinse it under a jet of water. If it is damaged, replace it. Correctly put

it back by inserting it in its tracks.

• Before attempting any maintenance operation, be sure to always disconnect the appliance from

the mains.

• We recommend that the bristles of the brushes are allowed to cool down in their normal position

after use, so as to avoid any mis-shaping.

• The accessories can be cleaned with a jet of steam

• Check periodically the condition of the rubber washer connections on the extension tubes (F)

and on the steam gun (35a) and (35b). If necessary, replace the washers with the exchange

washers supplied.

• To clean the body of the appliance, simply use a moist cloth. Do not use solvents or detergents

which may harm the body material.

• We suggest to periodically clean the generator to remove any scale deposits. It is

recommended to perform this operation only when the generator is cold and the plug is

disconnected from the mains. Put an empty container under the machine, with a flat screwdriver

turn the cock (23) anti-clockwise.

To clean the generator from the scale, insert the plug and push

the main supply switch (1). The pump is activated, making the

washing. Unplug the appliance and turn the cock (23) clockwise

tightly in its place. Switch the appliance on pushing only the main

supply switch (1), enabling the generator to refill again and only

when it is full, activate the starter switch (2).

Attention! if the generator is not full enough of water, the heating elements may burn out.

Fig. 14

Fig. 12

Fig. 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti MONDIAL VAP 5000 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti MONDIAL VAP 5000 Manual

Product: