Manual Polti MONDIAL VAP 3000 (page 6 of 10) (English)

648838

Zoom out

Zoom in

1/10

ENGLISH

The materials the appliance is made of are of an excellent quality and suitable to support

mechanical and thermic stress without changing their physical characteristics.

Different intervention levels of the devices foreseen by the current rules contribute to cancel the

possibility that further damages may compromise the safety of the appliance.

This appliance incorporates an auxiliary reservoir for detergent, which introduces detergent into

the steam flow by a special pump and valve.

The reservoir must be filled with liquid products without foam.

An internal sensor monitors the detergent level and sounds a warning signal if the machine runs

short of detergent.

To fill the detergent reservoir proceed this way:

1. Disconnect the tube from the cap (Fig.1)

2. Unscrew the cap, then refill (Fig. 2-3)

3. Screw on the cap again (Fig. 4)

4. Reconnect the tube to the cap (Care! connect tightly) (Fig. 4-5)

((

))

Positioning the handle for use:

- unscrew the two lock-down nuts (I) at the sides of the handle

- lift the handle (U) until it is hooked in its place (Fig. 1A)

- screw on the two lock-down nuts (I) tightly.

To lower the handle, proceed in the reverse order.

Two projections (V) on top of the handle allow to store the hose (Q) at the end of operations or

they can be used even during the working phase if the hose length becomes obtrusive.

((

))

Positioning the basket for use:

- Make sure the handle (U) is correctly positioned.

- Hook the accessories basket (1) to the handle (U) (fig. 7) by turning it towards the appliance.

- fix the two extension tube storage (Z) in the lower part of the handle (fig. 8).

- Make sure the basket is correctly assembled (fig. in the legend)

- Place the accessories on the basket as described in the figure in the legend.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti MONDIAL VAP 3000 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti MONDIAL VAP 3000 Manual

Product: