648785

Polti Lupin the 3rd Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
LUPIN THE 3
rd
10
earthed socket.
• Turn on the appliance by pressing the main
switch (3). During warm-up the 4 drink length in-
dicators (10) light up in sequence.
When optimal operating temperature is reached, the
supply sensor (8) remains fixed on as well as the in-
dicator (10) corresponding to the selected length.
• The height of the cup resting surface can also be
adjusted (11a) to two different positions (high or
low), depending on whether mugs or coffee cups
are being used.
To adjust the surface height lift and remove the
collection drawer (11) from the appliance (fig.3),
pull out the cup surface rest (11a) from the liquid
collection compartment (11c), as shown in fig. 4,
and replace in the most suitable position.
WARNING: The first time you use the appli-
ance, it is important to do a washing cycle us-
ing a cleaning capsule provided as described
in the "MAINTENANCE" section.
MAKING COFFEE
• Put a cup under the coffee dispenser (6).
• Ensure that the cream konb (5) on the back of
the appliance is in the open position (OPEN)
(fig.5).
When open (OPEN), the cream tap (5) exploits
the “Venturi” effect, namely the coffee is mixed
with air, making it extra creamy.
• Open the capsule compartment door (7a) and
put a capsule in the compartment (7), in the posi-
tion suggested by its shape (fig.6).
• Close the door, pushing it all the way.
• Adjust the length of the drink to be supplied by
turning the knob (9) to one of the 4 pre-set regu-
lations.
The first 3 indicator lights correspond to short, me-
dium and long coffee, the last, instead, is for drinks
like tea (fig. 7).
The choice is shown by the turning on of a length
signaller (10) positioned at the level of the cho-
sen length.
• Touch the supply sensor (8). A few moments la-
ter, the coffee will start to come out.
The supply stops automatically once the previou-
sly selected quantity has been dispensed. Sup-
ply can in any case be interrupted at any stage
by pressing the supply sensor once again (8).
• The used capsule automatically falls into the col-
lection drawer (11) when a new one is placed in
the compartment (7).
Empty the used capsules drawer frequently
to ensure that used capsules do not block the
exit passage.
NOTE: before the cleaning operation, ensure that
the empty capsule has been inserted and then
touch the supply sensor (8). If the instruction is not
followed, the water supplied is collected in the li-
quid collection compartment (11c) instead of co-
ming out from coffee dispencer (6).
PREPARATION OF DRINKS / TEA
This machine can prepare also some other drinks
and infusions with Aroma Polti Line.
• Before preparing drinks or tea, close the cream
knob (5) by rotating it to the “CLOSE” position
(fig.5).
• To supply the drink, proceed as for preparing cof-
fee.
WARNING: always ensure that the cream knob
is repositioned to “OPEN” before preparing cof-
fee again.
SHORTAGE OF WATER
Lack of water in the tank is signalled by the simulta-
neous flashing of the 4 drink length indicators (10).
Fill the tank again as described previously.
AUXILIARY SOCKET FOR
CAPPUCCINO MAKER
It is possible to connect the Cappuccì (optional) to
the coffee machine with the auxilary socket (4).
Open the auxiliary socket door with a screwdriver.
Warning: This operations must be followed with
the coffee machine not connected to the main
power. Follow then the Cappuccì instruction
manual.
• WARNING: the capsule is automatically pu-
shed into the compartment when the door
(7a) is closed, pushing it as far as it will go.
Never push the capsule in with your fingers.
english
LUPIN M0S10100 1S01:A5 15/06/2012 14.31 Pagina 10
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Lupin the 3rd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Lupin the 3rd in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info