Manual Polti LECOLOGICO AS 806 (page 9 of 10) (English)

649056

Zoom out

Zoom in

1/10

LECOLOGICO AS 805 - AS 806 SPECIAL PETS

• Remove the sponge filter (17b) from the cage.

If the filter is damaged, replace it. Rinse all com-

ponents under running water. Let the sponge fil-

ter dry before putting it back into the appliance.

• Reassemble the filter assembly, repeating the

operations in the reverse order.

Note: Make sure that the filter nozzle (17c) is cor-

rectly positioned, checking that the arrow on the

nozzle is aligned with the notch on the bottom of

the cage (17a) (fig.15).

• If the filter needs replacing, always use an origi-

nal Polti filter, available by mail order from the

Technical Service Centre.

•A cleaning brush (Z) is supplied for easy clean-

ing of the water container (6); it may also be

used to clean the appliance’s hose connections

and the inside of tools.

NOTE: Do not use the brush for cleaning the out-

side of the appliance

((

))

““

””

((

))

Proceed as follows to clean filters:

•press the two levers on the filter cover (9a) and

pull off the filter cover (9) (fig.16).

• Pull on the “dual filter” (10b) to remove it from

its housing and then remove the microfilter and

moisture protection filter that compose it

(fig.19).

• Rotate the filter retainer (10a) as shown in

fig.17 and remove the Hepa filter (10) (fig.18).

• Rinse the filters in cold running water. Shake

them gently after washing to eliminate any resid-

ual dirt and excess water.

• When dry, put the filters back in the appliance,

performing the same operations in reverse or-

der.

NOTE: let the filters dry naturally, far away from

light and heat sources. You should wait 24 hours

before reassembling filters in the appliance.

• Replace the filters if they are torn.

• Filters should be cleaned every 4 months.

WARNING: do not clean filters with the brush, as

this could damage them, decreasing their filtering

capacity.

Do not use detergents, do not scrape filters, and

do not attempt to wash them in a dishwasher.

• The vacuum cleaner won’t start:

check that the appliance is plugged in

• The vacuum cleaner goes off during use

and the four indicator lights come on:

a) there is too much liquid in the container. Re-

store the correct level.

b) The selected power level is too high for the

type of surface you are cleaning.

In both cases, press the switch (1), unplug the

power cable and leave it unplugged for a few

seconds so that the safety device will be re-

set.

• Suction power is decreased:

The nozzle, hose or tools may be blocked up, or

the Hepa filter may be dirty. Clean the Hepa fil-

ter and remove any obstructions from the hose.

• Leakage of water when suctioning up liq-

uids:

The float may be blocked up. Clean the filter as-

sembly and make sure that the water level in the

container is correct.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti LECOLOGICO AS 806 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti LECOLOGICO AS 806

Polti LECOLOGICO AS 806 User Manual - German - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti LECOLOGICO AS 806 Manual

Product: