484689

Polti Forever 1905 Eco Program Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
VAPORELLA FOREVER 1905 ECO PROGRAM
29
ENGLISH
PREPARATION FOR USE
• Pull up the self-refilling tank lid (1) (Fig. 1) and
fill the tank with 1,2l of water, making sure it
does not overflow. Close the lid.
Ordinary tap water may also be
used.However, since water contains lime-
stone by nature, which may cause scaling in
the long run, we recommend using a 50/50
mixture of tap water and demineralised water
or treated with softening systems. To use tap
water only and avoid scale formation, we re-
commend the addition of the special natural
scale removal agent Kalstop FP 2003.
Do not use demineralised water alone, but
mix it with tap water as described above.
Never use distilled
water or scented water.
• Slowly pull out the power cable (9) to the de-
sired length as shown in (fig. 2).
• Connect the cable plug to an earthed power
supply of the correct voltage.
• Press the ON/OFF switch (2). The ON indica-
tor light (A) and the “Iron heating” indicator li-
ght (11) will turn on.
• The sound emitted on switching on your ap-
pliance and periodically during use, is due to
the water refilling system and is quite normal.
INSTRUCTIONS FOR USE
Check the manufacturer’s label on the garment,
and interpret the symbol on the label as follows:
• It is best not to use steam when ironing silk or
synthetics, as iron temperature and pressure
will be enough to ensure good results. Use the
WOOL setting if you wish to iron particularly
delicate fabrics (synthetics and silk) with
steam.
• To optimise ironing time, iron the most deli-
cate fabrics (SYNTH/SILK settings) before
heavier fabrics. If you do it the other way
around, even if steam production is not
stopped, you will have to wait for the iron and
the boiler to cool down to the selected iron
temperature and steam pressure.
Check, based on the following table, the most
appropriate type of ironing:
DRY IRONING
Adjust the selection dial (6) to the SYNT SILK
DRY position.
Wait until the iron heating light (11)turns off.
STEAM IRONING
Set the correct programme by turning the selec-
tion dial (6) corresponding to the type of fabric to
be ironed (Fig.3).
• After setting the desired programme, the
steam ready light (B) flashes. (except if using
the SYNT SILK DRY programme, in which
case the boiler remains off).
• Before starting to iron, wait for the steam pres-
sure indicator (B) to remain on fixed and the
“Iron heating” indicator light (11) to go out.
• Push the button (10) on the iron to release
bursts of steam from the holes on the sole-
Ironing instructions
given on the label
Type of fabric:
Linen
SETTING
Ironing instructions
given on the label
Type of fabric:
Cotton
Denim
SETTING
Ironing instructions
given on the label
Type of fabric:
Wool
Fibres
SETTING
Ironing instructions
given on the label
Type of
fabric:
Acetates
Acrylic
Velvet
Nylon
Silk
Viscose
Polyester
SETTING
VL FOREVER 1905 ECO P. M0S10166 1S02_7:FEV 1000-950.qxd 09/03/2012 9.52 Pagina 29
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Forever 1905 Eco Program at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Forever 1905 Eco Program in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info