ENGLISH
PP
PP
LL
LL
AA
AA
CC
CC
II
II
NN
NN
GG
GG
TT
TT
HH
HH
EE
EE
FF
FF
AA
AA
11
11
55
55
CC
CC
SS
SS
INDOOR UNIT
• The air conditioner must be connected to an electrical socket providing 220-240V/50Hz.
• Install the indoor unit in the room where the air conditioner is to operate. It has to be placed
on “a flat surface”.
• The 2 rear rollers are fitted with a brake (8) allowing the FA15CS to be blocked in a stable po-
sition. Do not forget to release the brake whenever you wish to move your FA15CS air condi-
tioner.
OUTDOOR UNIT
• The outdoor unit must be installed outside the building.
• This outside unit has been designed to withstand all types
of weather conditions and does not require any particular
sort of protection.
• It must be placed directly on the floor of a balcony or ter-
race (Fig. 3) or any other horizontal surface.
• It can also be fixed onto a wall (Fig. 4) using the wall
brackets provided. A minimum distance of 6 cm must be
kept between the outdoor unit and the wall, 50 cm on each
side (Fig. 5).
• If the outdoor unit is installed at a certain height, it is impor-
tant that the highest point of the sleeve does not exceed
1,60 m higher from the base of the indoor unit (Fig. 4).
• Excessive pressing or bending of the sleeve must be abso-
lutely avoided (Fig. 4).
Your FA15CS is fitted with a water evacuation pipe, the ope-
ning being situated on the right hand side of the connections
of the indoor unit (9). If your outdoor unit is positioned at a hei-
ght of more than 1,60 m., it is recommended to evacuate the
water through the sleeve of the inside unit by removing the
plug. A plug must, therefore, be placed on the outlet of the wa-
ter evacuation on the outdoor unit.
Failure to comply with these two instructions may hinder the
correct functioning of the condensation water evacuation
(dehumidification) and in this case, water leakages, coming
from the inside unit, may occur.