580999

Polmar Navy 08 Manual

17
Zoom out
Zoom in
Previous page
1/26
Next page
16
BASIC OPERATION
TURNING ON/OFF YOUR RADIO
Rotate Power/volume knob to turn the radio on or off with an indicating voice of
click. And adjust the volume to a comfortable level.
ADJUSTING SQUELCH
Press and release the SQL key to enter squelch mode,press the to adjust squelch
level. Press and release the SQL key again to leave Squelch mode.
Squelch is used to eliminate static and background noise and allows for silent opera-
tion of your NAVY-08 until a transmission is received.
If the squelch is too high, only the strongest transmissions can be heard, and when
too low, intermittent static and noise are heard.
SELECTING HIGH/LOW POWER OR LOCK KEYPAD
Press and release this key to toggle the transmit power between high and low. When
the unit is operating at low power, “Lo” appears on LCD and “Hi” appears on LCD
when operating at high power.
You also can lock your radio keypad to avoid accidental pressing of keys by activating
the key lock. Pressing and holding Hi/Lo-Lock button key lock icon will appear on LCD if
it is enabled. The function is effective to all keys except PTT and Hi/Lo-Lock buttons.
SELECTING CHANNELS
Press the / (UP/DOWN) button to scroll through the available channels.
Note: Not all channel numbers are available in INT bands.
TRANSMITTING AND RECEIVING
Press and hold the Push-To-Talk (PTT) key to transmit on the selected channel, then
release to receive. The TX indicator appears while transmitting.
SCANNING FEATURES
Your NAVY-08 is equipped with three types of scan options: All Scan, Saved(Memory)
Scan and Priority Scan. If there are no channels in memory, the default is All Scan.
This function automatically searches for transmissions on the channel set being
scanned. If a TX signal is received, the scan stops on the receiving channel as long
as it is present and the SCAN indicator ashes. If the signal is lost for ve seconds,
the radio resumes scanning. During the Scan Modes:
Press the Channel / (UP/DOWN) button to change the scan direction. UP increments
the channel while DOWN decrements it.
Press and release the SCAN button to terminate the SCAN mode.
DW/TRI button do not function and sound an error beep if pressed.
All Scan
Press and release the SCAN button when no channels are stored in memory to acti-
vate the All Scan function. The SCAN indicator appears on the LCD during All Scan.
In All Scan mode, all channels in the channel set are scanned in sequence, assuming
no channels have been stored in memory. After the last channel number has been
scanned, the cycle repeats.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polmar Navy 08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polmar Navy 08 in the language / languages: English, Italian as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info