676372

Polk Blackstone TL2600 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10 Contact Polk Audio Customer Service 1-800-377-7655 (Outside US: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM Eastern Time, polkcs@polkaudio.com
SPEAKER LEVEL (OPTION 2)
5.1 SYSTEM
7.1 SYSTEM
OPTION #2—
Two channel or Dolby
®
Pro Logic receiver with no “Sub Out.”
If you elect to use the speaker level inputs, use two-conductor 16 gauge or
thicker speaker wires. See your Polk dealer for wire recommendations.
Note that one of the speaker input terminals on the rear of the speaker is marked red (+)
and the other black (-). Make certain that you connect the wire from the red (+) terminal
of your receiver to the red (+) terminal on your speaker, and the wire from the black (-)
terminal of the receiver to the black (-) terminal on your speaker. Speaker wire has some
indication (such as color coding, ribbing, or writing) on one of the two conductors to help
maintain consistency. If your subwoofer doesn't seem to produce much bass, it is most
likely that one of the speaker wires is connected backwards. Double check all connec-
tions for correct polarity.
Strip 1/2" (12mm) of insulation from each of the two conductors on both ends to expose
the bare wire. Twist the exposed wire of each conductor to form two un-frayed strands.
• Connect the left and right front speaker outputs of your receiver to the
speaker level inputs of the powered subwoofer using speaker wire.
• Then, connect the left and right front speakers using speaker wire from
the speaker level outputs from the powered subwoofer.
• Connect the Center Channel Speaker directly to the center channel
output from your receiver.
• Connect the Rear Surround Satellites directly to the rear or surround
channel outputs from your receiver.
Receiver Settings:
Front speakers = LARGE
Subwoofer = “OFF” or “NO”
Center and Surrounds= SMALL
Crossover Frequency= 120 Hz
OPÇÃO #2—
Receiver de dois canais ou Dolby Pro Logic sem “Sub Out” (Saída sub).
Se optar por usar entradas de nível de caixas acústicas, use cabos para caixas
acústicas com dois condutores de 16 AWG ou mais. Consulte o revendedor da Polk
para se informar sobre os cabos recomendados.
Note que um dos terminais de entrada na parte traseira da caixa acústica está marcado
(+) em vermelho e o outro (-) em preto. Certifique-se de conectar o cabo do terminal (+)
vermelho do receiver ao terminal (+) vermelho da caixa acústica e o cabo do terminal (-)
preto do receiver ao terminal (-) preto da caixa acústica. O cabo para caixa acústica está
marcado de alguma maneira (codificado por cores, faixas ou inscrições) em um dos dois
condutores para ajudar a manter a coerência da conexão. Se o subwoofer aparentemente
não produzir um bom nível de graves, é bem provável que um dos cabos da caixa acústica
tenha sido conectado de maneira invertida. Verifique novamente se a polaridade das
conexões está correta.
Retire 12 mm do isolamento das duas extremidades de cada um dos dois condutores
para expor a fiação. Torça a fiação exposta de cada condutor para que não fique desfiada.
• Conecte as saídas das caixas acústicas frontais esquerda e direita do receiver
às entradas para caixas acústicas do subwoofer amplificado usando cabos para
caixas acústicas.
• Em seguida, use cabos para caixas acústicas para conectar as caixas acústicas
frontais esquerda e direita às saídas para caixas acústicas do subwoofer amplificado.
• Conecte a caixa acústica do canal central diretamente à saída do canal central
do receiver.
• Conecte as caixas acústicas satélite surround traseiras diretamente às saídas
do canal surround do receiver.
• Ajustes do receiver:
Caixas acústicas frontais = LARGE
Subwoofer = “OFF” ou “NO”
Canal central e surrounds = SMALL
ENGLISH
PORTUGEUSE
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polk Blackstone TL2600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polk Blackstone TL2600 in the language / languages: English, German, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info