Manual Polisport Bubbly Mini Plus (page 6 of 74) (All languages)

773023

Zoom out

Zoom in

1/74

| 4 | www.polisport.com

1. Turn the child seat upside down as shown in the image. Cut the plastic

straps that hold the mounting block (H).

2. Remove the metallic bracket (G) from the seat by cutting the straps.

Disengage and remove the metallic bracket (G) from the child seat, pulling

it upwards.

3. Use the Allen key No. (H9) to loosen and remove the metal mounting

plate (F1).

4. Hold the metallic bracket (G) the same as in the picture and pass it

through the opening in the child bicycle seat.

5. In order to adjust the child bicycle seat according to the bicycle size,

set the metallic bracket (G) into one of the two allowed positions to move

the seat backward or forward. At the beginning we suggest to place it on

the position No 1.

6. Insert the metallic mounting plate (F1) on the grooves of the child

bicycle seat, and close it as indicated in the picture.

7. Place the washer (F3) on the screw (F2). Then tighten securely with the

key (H9). Tighten tightly so that the metal bracket (G) is securely fastened.

This step is extremely important for the safety of the child.

8. Remove the screws (H5) on the mounting block (H), with the Allen key

no. 6 (H9).

9. Please check if you can install the mounting kit option H.A. In order to

use this set you need at least 35 mm height available on the the headtube

frame. If you don´t have this length available, please choose option H.B.

Option H.A.: To install the mounting block (H), option H.A, position the

mounting block (H1) facing the front of the bicycle frame headtube. Make

sure that the black plastic part of the mounting block (H1) is facing the

top. Using the screws (H5), secure the metallic mounting plate (H4) and

the plastic connector (H3) to the mounting block (H1).

By using the combination H.A with the screws (H5) you will be able to

place the mounting block (H) in frame headtubes ranging from ø 22 to

34 mm.

If your frame head tube is wider, please use the screw H8 (supplied in the

plastic bag ), and you will be able to place the mounting block (H) in frame

headtubes ranging from ø 28 to 40 mm.

It´s very important that the screw is long enough to allow the correct

tightening of the mounting Block (H).

Option H.B.: In case the bicycle frame does not have enough space to

apply the mounting Kit (H.A), use the additional kit (H.B) supplied in the

plastic bag. By using the combination H.B with the screws (H8) you will be

able to place the mounting block (H) in frame headtubes ranging from

ø 28 to 40 mm.

Position the mounting block (H1) facing the front of the bicycle frame

headtube. Make sure that the black plastic part of the mounting block

(H1) is facing the top.

Using the screws (H8), secure the metallic mounting plate (H7) and the

plastic connector (H6) to the mounting block.

H.A./B.A.: Next, make sure that the mounting block (H) is centered

regarding the headtube, and strong hand tighten the screws, applying the

same force in both of them. Make sure the mounting block (H) is ﬁrmly

ﬁxed to the frame head tube. This step is extremely important for the

child’s and cyclist safety.

10. Insert the ends of the metallic bracket (G) into the holes of the

mounting block (H1) until you hear a click (1) from both sides. This sound

indicates it is in the locked position. Make sure that the ends of the

metallic bracket (G) will pass through the mounting block (H) as shown

in the picture (2). After properly installing the baby-seat please make sure

that the mounting block (H) and the seat (A) are properly centered. Make

sure that the screws are properly handed tighten and that the mounting

block (H) is securely ﬁxed. Try to move or rotate the baby-seat in order to

check if the mounting block (H) is ﬁrmly attached. If it´s properly attached

it will not move. This step is extremely important for the children and

cyclist safety.

11. (B) To place the child in the seat, ﬁrst open the belt. Start by pressing

the releases on the sides of the safety buckle (B4) and pull the buckle (B1)

upwards, so that it slides out of the socket (B5). Place the child in the seat.

Insert the safety buckle (B1) in its socket again (B5). Make sure that the

• This child bicycle seat must not be mounted to bicycles ﬁtted with rear

shock absorbers.

• This child bicycle seat must not be mounted to a racing bicycle with

drop handlebar.

• This child bicycle seat must not be mounted to Motorized Vehicles such

as Mopeds and Scooters.

• This child bicycle seat must not be mounted in bicycles with triangular,

square or carbon ﬁber frames.

• This child bicycle seat must be assembled on bicycles with round and

oval frame head tube with diameters ranging from Ø22 to Ø40 mm.

• The child bicycle seat must be assembled on bicycles with wheels with

diameters of 26” and 28”.

• This child bicycle seat is only suitable for carrying children with a

maximum weight of 15 Kg (and children with recommended ages ranging

from 9 months to 3 years of age - with the weight as the decisive variable).

• The total weight of the cyclist and the child transported must not exceed

the maximum permitted load permitted for the bicycle. Information on

the maximum load can be found in the operating instructions of the

bicycle. You can also contact the manufacturer for this question.

• The seat may only be mounted on a bicycle suitable for the attachment

of such additional loads.

• The position of the child bicycle seat must be adjusted so that the bicycle

rider does not touch the child bicycle seat with the feet when in motion.

• It’s very important to adjust correctly the seat and its component parts

for optimum comfort and safety of the child. It’s also important that the

seat does not slope forward so that the child does not tend to slide out of

it. It’s also important that the backrest slope backward slightly.

• Check if all parts of the bicycle function correctly with the child bicycle

seat mounted.

• Check the instructions of the bicycle, and If you have any doubts

on ﬁtting the child bicycle seat to your bicycle, please contact your

bicycle supplier for further information.

ASSEMBLY INSTRUCTIONS

TECHNICAL FEATURES

A. Main seat

B/B.A. Safety belt

B1/B.A1. Safety lock

B2. Belt adjuster

B3. Central belt adjuster

B4. Safety buckle releases

B5. Safety buckle socket

C. Cushion

D. Footrest strap

E. Footrest

F. Metallic mounting Kit

F1. Metallic mounting plate

F2. M8x16 screw

F3. M8 washer

F4. M8 nut

G. Metallic bracket

H. Mounting block

H1. Plastic mounting block

H2. Release button

H3. Plastic Conector

H4. Metallic mounting plate

H5. Screw M8x35

H6. Frame plastic mounting

H7. Metallic mounting plate

H8. Screw M8x50

H9. Allen Key nr. 6

I. Batch serial number

TABLE OF CONTENTS OF PRODUCT

For child safety and for your peace of mind, Polisport has developed the

perfect child carrying solution that’s suitable for a wide range of adult bicycles.

Our ergonomic child seats are all built with safety and comfort as the primary

goals.

In this manual, you will ﬁnd information on attaching the child bicycle seat to

the frame head tube of your bicycle.

Carefully read the manual for a safe and correct installation of the child

bicycle seat.

FRONT BABY SEAT FOR BICYCLE

FRONT HEAD TUBE MOUNTING SYSTEM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polisport Bubbly Mini Plus in the language / languages: All languages as an attachment in your email.

The manual is 3.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polisport Bubbly Mini Plus Manual

Product: