693413
7
Zoom out
Zoom in
Previous page
1/69
Next page
User Manual 14
User Manual15
How to use
the OneStep
Charge the camera
Important The OneStep 2
will not be fully charged upon
purchase — it should be fully
chargedbeforefirstuse.To
charge the camera, plug the
USB charging cable into the Mi-
cro-USB slot on the camera’s
back panel, and the other end
of the cable into a charger,
such as a smartphone adapter
or your computer’s USB slot.
TheredashchargeLED will
turn off when the battery is
fully charged.
A full charge usually takes
about 2 hours through a wall
socket with a smartphone
adapter, or up to 4 hours
through a computer’s USB
slot. A fully-charged OneStep 2
camera will have enough pow-
er to shoot 15-20 packs of
film,dependingonusage.
Remember to turn your camera
off after every use to conserve
battery life.
Box contents
01 OneStep 2 Camera
02 USB Charging Cable
03 User Manual
04 Camera Neck Strap
1. Turn the
camera on/off
To turn the camera on,
slide the power switch into the
ONposition(down).Theash
charging LED on the back panel
will start blinking to charge
theash,andtheremaining
filmcounteronthetopofthe
camera will light up to indicate
that the camera is switched on.
To turn the camera off again,
return the power switch to the
OFF position.
2. Load the lm
Slidethefilmdoorlatch
toopenthefilmdoor.Push
thefilmcassettealltheway
in,withthefilm’sdarkslide
facing up.
Note Please check indi-
vidualfilmpackagingfor
development time, handling
and storage details.
3. Close lm door
Whenyouclosethefilmdoor,
the darkslide will eject from
the camera automatically,
underneaththefilmshield.
Theplasticfilmshieldis
designed to protect images
from light as they develop — it
should not be removed. Take
the darkslide out from under
thefilmshieldandletthe
filmshieldrollbackup.Ifthe
darkslide has not ejected,
removethefilmpackand
re-insert it, making sure it is
pushed all the way to the back
of the camera.
4. Set the Flash
& Lighten/Darken
Flash Thecameraashwill
trigger by default when you
shoot with the OneStep 2. To
shootwithouttheash,press
andholdtheashoverridebut-
ton on the back panel as you
press the shutter button.
Warning Shooting without
ashwillreducecamera
performance and picture
qualityinmostlightingsit-
uations except brightly-lit,
sunny environments. We
recommend always shoot-
ingwithash.
Lighten/Darken Use the light-
en/darken switch on the right
side of the lens barrel to adjust
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polaroid One Step 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polaroid One Step 2 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info