472707
9
Zoom out
Zoom in
Previous page
1/14
Next page
Date display module
The date display module (21) allows you
to print the date or the day/time on pic-
tures (22).
Setting the date
1 Press MOD (mode) repeatedly until the
desired date sequence is displayed:
No printing
Month/day/year
Day/month/year
Year/month/day
Day/time (24-hour clock)
Note: An
M in the display indicates which
digit is the month.
2 Press
SEL (select) to select the year,
month or day (see blinking digit).
3 Press
SET repeatedly (or hold button)
until the desired digit is displayed. Repeat
steps 2 and 3 until the desired year,
month and day are all set.
4 Press
SEL again to lock in the date.
Setting the time
1 Press MOD until the day/time mode is
displayed. The first set of digits in the dis-
play is the day of the month, followed by
the time in hours and minutes.
2 Press
SEL and the hours will blink. Press
SET to toggle through the hours. Press SEL
again to lock in the hour. The minutes will
now blink.
3 Press
SET to toggle through the minutes.
Press
SEL again to lock in the minutes.
4 Press
SEL again to lock in the time.
Shutting off the date display option
Press MOD until a series of dashes ap-
pears in the display.
Note: The date module is powered by the
battery in the film pack, or by the batter-
ies in the handgrip. If there are no batter-
ies or film in the camera for more than 5
minutes, you will need to reset the date/
time after replacing the batteries.
Flash control (23)
The two built-in electronic flash units are
designed to provide even illumination at
all reproduction scales. You can turn off
either flash unit if side lighting is needed
to show texture or elevation. The light
output from the remaining flash unit will
be increased to produce the correct
exposure.
Press the flash control once to turn off
the right flash; press it a second time to
turn off the left flash; press it a third time
to turn off both flash units.
Lighting techniques
Both built-in flash units can be turned off,
and auxiliary lighting used. The auxiliary
light is connected to the PC socket on the
back of the camera (24). Advanced photo-
graphers may find it useful to experiment
with different lighting arrangements.
The auxiliary lighting must be electronic
flash — do not use tungsten, halogen or
fluorescent lights.
The built-in flash can be combined with
auxiliary lighting.
Test exposures may be required to deter-
mine the correct location and settings for
the auxiliary flash unit for correct expo-
sure.
Outdoor use
The camera is designed primarily for
indoor use; if it
must
be used outdoors:
Select an area that is not subjected to
bright sunlight, which may cause over-
exposed pictures.
Shade the subject from direct sunlight. (It
is difficult to see the ranging lights in very
bright light.)
Use the built-in flash units to ensure con-
sistent exposure.
English 7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polaroid Macro 5 SLR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polaroid Macro 5 SLR in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info