Manual Polaroid Impossible Instant Lab Universal (page 6 of 10) (English)

694110

Zoom out

Zoom in

1/10

SAFETY INFORMATION

SAFETY

CAUTION – RISK OF ELECTRIC

SHOCK – DO NOT OPEN/

DISASSEMBLE THE MOTORIZED

ROLLER SYSTEM.

· Do not disassemble the device.

Incorrect reassembly can cause

electrical shock if the device is used

again.

· Do not immerse the device in water

or other ﬂuids.

· Do not operate the device in a high

humidity environment or very dusty

environments.

· Do not attempt to tamper with,

adjust, or remove the battery and/

or the electronics located below the

rollers behind the device’s ﬁlm door.

· Do not attempt to remove the door

itself as it is connected electronically

to the body of the device. Doing so

is unsafe, will likely damage your

device, and will void your warranty.

· Do no insert metal objects into the

product.

· Do not insert any objects into the

rollers or gears.

· Keep small children and infants

away from the device to avoid them

being injured by the device’s moving

parts.

· Do not use or store the product

near any heat source or any type

of equipment that generates heat,

including stereo ampliﬁers.

· Do not use the device near

ﬂammable or explosive gases.

· Do no charge the device if you notice

any unusual odors, noise or smoke.

· Do not attempt to disassemble the

ﬁlm’s battery or modify it in any way.

If battery ﬂuid gets into your eyes,

immediately rinse your eyes with

fresh cold running water and seek

medical attention immediately.

BATTERY AND CHARGER

· This device uses a custom

Impossible lithium ion battery that

is non-removable and mounted

below the roller system. No other

type of battery can be used. Battery

replacement can only be done by

Impossible Service Centers. The

battery will provide many years of

service if properly used.

· Power consumption varies depending

on the environment the device is

used in and how the device has been

stored. Usually the battery will power

the processing of dozens of ﬁlm

packs with one single charge.

· Once the battery energy level falls

below a certain level, the device

will no longer process ﬁlm. The LED

will blink and signal when it needs

to be recharged. This is to avoid a

photo from getting stuck as it’s being

processed through the roller system.

· The rechargeable battery is not fully

charged at the time of purchase.

Charge the battery fully with the

provided Impossible USB Charger.

This usually takes 1 – 2 hours (can

vary on usage).

· The supplied battery charger is ONLY

for the Instant Lab Universal. Do not

charge any other type of battery with

the supplied charger as this could

cause leaking, overheating, explosion

or ﬁre.

· The supplied battery charger has

been tested and certiﬁed to work

with the Apple iPhone power

adapter. While it can be used in

other USB ports, e.g. computers,

USB power adapters, TVs, cars etc.

Impossible can not guarantee correct

operation.

· When the device is no longer in use,

please recycle it properly.

USAGE ENVIRONMENT

· To protect the high-precision

technology contained in this

product, never leave the device

in the following environments for

an extended period of time: high

temperature (+40°C/104°F), high

humidity, places with extreme

changes in temperature (hot and

cold), direct sunlight, sandy or dusty

environments such as beaches,

damp places, or places with strong

vibrations.

· Do not drop the device or subject it

to severe shocks or vibrations.

· Do not push, pull or press on the

lens.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polaroid Impossible Instant Lab Universal in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polaroid Impossible Instant Lab Universal Manual

Product: