591382
6
Zoom out
Zoom in
Previous page
1/12
Next page
5. Fine-tune the positioning of the sensor so
that the magnet passes close to the sensor
without actually touching it (picture 3 on
the back cover). Tilt the sensor towards the
magnet so that the gap between the sensor
and the magnet is under 4 mm/0.16’’. The
gap is correct when you can fit a cable tie
between the magnet and the sensor. There
is a small caved dot on the backside of the
sensor (picture 1 A on the front cover),
which indicates the spot the magnet should
be pointing at when passing the sensor.
6. Rotate the crank to test the cadence
sensor. The flashing red light on the sensor
indicates that the magnet and the sensor
are positioned correctly. If you keep
rotating the crank, the light will go off.
Tighten the cable ties securely and cut off
any excess cable tie ends.
4 ENGLISH
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar Y6 CADENCE SENSOR BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar Y6 CADENCE SENSOR BT in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar Y6 CADENCE SENSOR BT

Polar Y6 CADENCE SENSOR BT User Manual - German - 13 pages

Polar Y6 CADENCE SENSOR BT User Manual - Dutch - 12 pages

Polar Y6 CADENCE SENSOR BT User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info