542823
17
Zoom out
Zoom in
Previous page
1/22
Next page
33
32
Polar glossary
In the MEASURE mode the flashing heart symbol indicates the
ongoing heart rate measurement. The heart symbol flashes at the
pace of the beating of your heart.
In the MEASURE mode borders around the heart symbol
indicate that the transmission is coded. If the borders are missing,
your heart rate transmission is non-coded.
In the TIME mode indicates that the alarm is on or off. In the
MEASURE mode indicates that the sound signal to alarm if you are
exercising below or above your target heart rate zone is on or off.
ALM: ALARM mode
AM/PM: 12 hour mode of TIME
AVERAGE HEART RATE; AVG: Average of heart rates measured
during an exercise period. The average heart rate is calculated from
the time the stopwatch is running.
BPM: Beats per minute
DATE: Indicates the date in the DATE setting mode.
DAY: Indicates the day in the TIME setting mode.
DEL FILE X: You can delete the newest file manually.
DEL FILEs (No/Ye): You can disable/enable the automatic deletion of
your oldest files as your memory becomes full.
DISP 1: In DISP 1 mode (Time Display) you can choose whether you
prefer to see the stopwatch or the time of day displayed during the
heart rate measurement.
DISP 2:In DISP 2 mode (Relaxation/Lap Display) you can choose one
of three alternatives to be displayed during the heart rate measure-
ment:
1. Relaxation Rate in milliseconds and corresponding graphic bar are
always displayed when no lap times have been recorded and again
after 5 seconds after each LAP press
2. all the time LAP
3. 5 seconds LAP and 5 seconds Relaxation Rate scanning.
DIST: You can set the heart rate reception distance manually.
ECG: Electrocardiogram
ELECTRODES: Pick up the heart's electrical impulses and are
encased in the Transmitter, behind the two grooved areas.
END: A recording has stopped and / or you have run out of memory.
FILE: File mode
FULL: In the measure mode FULL indicates that memory is full and
you should delete files to be able to continue recording.
GRAPHIC BAR: In the graphic bar there are ten blocks. In the SET
mode the blocks indicate the different heart rate measurement func-
tions you can set. A flashing block means that the setting of a function
is possible. In the MEASURE mode the graphic bar indicates the
Relaxation Rate or an ongoing Recovery calculation.
HALT: HALT appears on the display to indicate that stopwatch is
stopped after 99:59:59. This function is designed to save battery
energy.
HEART RATE: The number of heart beats per minute
HRM: Heart Rate Monitor; includes Polar Transmitter, Wrist Receiver
and Elastic Strap
INT: Interval for automatic heart rate recording
LAP: Together with a number indicates how many lap times are used
in MEASURE and FILE modes.
Lap time: Time needed to move once around a closed course or track.
LEFT: Tells you amount of memory left.
LIM 1/LIM 2: Heart Rate Limits 1 and 2
LOWER THRESHOLD; AeT: Physiological point during exercise of
increasing intensity at which the blood lactate begins to accumulate
above resting level, but body is simultaneously able to synthetize
most of it. This is known as Aerobic Threshold (AeT) and corresponds
usually to 2 mMol lactate per liter of blood.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar VANTAGE NV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar VANTAGE NV in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info