542821
12
Zoom out
Zoom in
Previous page
1/29
Next page
21
20
You can recall the limits onto the display by bringing
the watch close to the Transmitter.
If needed you can reset the stopwatch to zero and
restart OwnZone determination:
1. Stop the OwnZone determination by
pressing SET/START/STOP.
Heart rate limits for your previously determined
OwnZone appear on the display.
2. Stop the stopwatch by pressing SET/START/STOP.
3. To reset the stopwatch press and
hold SET/START/STOP for 2 seconds.
4. To restart the stopwatch press SET/START/STOP.
You can turn the OwnZone timing signals off by pressing
and holding SIGNAL/LIGHT for two seconds before
starting the OwnZone determination. However you will
hear two long beep signals at the time Polar SmartEdge
has determined your OwnZone heart rate limits.
OWNZONE METHODS
Polar SmartEdge uses multiple methods for determining your
safe OwnZone. The primary method is to measure and
analyse the heart rate variability and thereby determine the
most individual and current parameters.
If your heart rate exceeds the safety limit during the
determination, Polar SmartEdge picks up your latest OwnZone
definition based on heart rate variability. Alternatively, if there
is no previous determination in memory, Polar SmartEdge will
automatically calculate Target Zone limits which are based on
your age predicted maximum heart rate. These methods ensure
the safest possible exercising zone determination for you.
HOW TO DETERMINE YOUR OWNZONE
OwnZone is easiest determined by walking and jogging as
instructed below. However, you are able to find your OwnZone
with other exercise modes as well, e.g. exercising with a
stationary bike. The principle is that you start exercising very
slowly with light intensity and gradually increase your heart rate.
1. Check that you have set your personal user
information correctly.
2. Because the heart rate variability measurement needs
every heart beat to be picked up properly, make sure that
the transmitter belt is tight enough and the electrodes well
moistened. Moisturizing cream can be used to improve
the contact.
3. Check that you have the OwnZone function ON.
4. Start the heart rate measurement as described earlier.
5. Start the stopwatch.
appears in the display.
Stopwatch starts running.
6. There are five stages in finding your OwnZone. After each
stage you hear a long beep which tells you that you should
increase your speed slightly. The display shows which
stage you are in:
1. Walking at very slow pace for 2 min.
2. Walking at brisk pace for 2 min.
3. Walking at very brisk pace for 2 min.
4. Jogging at slow pace for 2 min.
5. Running for 2 min.
7. At some point during the stages 2 - 5 you hear two beeps.
This indicates that Polar SmartEdge has determined your
exercising limits and you can continue your exercising.
The determined heart rate limits are displayed
for a few seconds.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar SmartEdge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar SmartEdge in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info