542821
7
Zoom out
Zoom in
Previous page
1/29
Next page
11
10
3. Press SIGNAL/LIGHT repeatedly to adjust the desired hour.
4. Press SET/START/STOP to lock your selection.
The tens of minutes start flashing.
5. Press SIGNAL/LIGHT repeatedly to adjust the desired
tens of minutes.
6. Press SET/START/STOP to lock your selection.
The seconds go to zero.
The minutes start flashing.
7. Press SIGNAL/LIGHT repeatedly to adjust
the desired minutes.
8. Press SET/START/STOP to lock your selection.
You have gone through the time setting function.
The seconds start running.
AM/PM or the hours start flashing.
9. Press MODE and move onward to set the date.
SETTING THE DATE
The date follows the structure YearMonthDay.
The digit for the tens of years is flashing.
1. Press SIGNAL/LIGHT to adjust the desired value for
the tens of years.
2. Press SET/START/STOP to lock your selection.
The digit for years starts to flash.
3. Press SIGNAL/LIGHT to adjust the desired value for the year.
4. Press SET/START/STOP to lock your selection.
The digit for month starts to flash.
5. Press SIGNAL/LIGHT to adjust the desired value for the month.
6. Press SET/START/STOP to lock your selection.
The digit for day starts to flash.
7. Press SIGNAL/LIGHT to adjust the desired value for
the day. You have gone through the date setting function.
The digit for day is flashing.
8. Press MODE and return to the Time of Day mode.
SETTING THE ALARM TIME
In the Time of Day mode, press SET/START/STOP.
Alarm symbol • is flashing.
1. Press SIGNAL/LIGHT to select whether you want
the alarm on or off.
Alarm is on
Alarm is off
2. Press SET/START/STOP to lock your selection.
AM/PM starts to flash.
In 24h mode the hours flash
>
step 5
3. Press SIGNAL/LIGHT to select AM or PM.
4. Press SET/START/STOP to lock your selection.
The hours start to flash.
5. Press SIGNAL/LIGHT repeatedly to adjust the desired hour.
6. Press SET/START/STOP to lock your selection.
The tens of minutes start flashing.
7. Press SIGNAL/LIGHT repeatedly to adjust
the desired tens of minutes.
8. Press SET/START/STOP to lock your selection.
The minutes start flashing.
9. Press SIGNAL/LIGHT repeatedly to adjust the desired
minutes. You have gone through the alarm setting function.
The minutes are flashing.
10. Press MODE and move onward to set the time.
When the alarm sounds, it will remain on for one minute
unless you turn it off earlier by pressing any of the
three buttons of the wrist receiver.
SETTING THE TIME OF DAY
AM/PM (In 24h mode the hours) is flashing.
1. Press SIGNAL/LIGHT to select AM or PM.
2. Press SET/START/STOP to lock your selection.
The hours start to flash.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar SmartEdge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar SmartEdge in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info