464066
34
Zoom out
Zoom in
Previous page
1/68
Next page
new sensor? is displayed.
If your sensor is already taught, select No.
To teach a new sensor, make sure that there are no other s3/s3+ stride sensors or G3/G5 GPS sensors
nearby (40 m/131 ft) and then select Yes.
To return to time mode, press and hold the STOP button.
Altitude
The training computer converts measured air pressure into an altitude reading. Change the settings of the
altimeter in the Altitude menu. You can calibrate the altimeter manually or automatically.
Set the altitude function on or off
Select Settings > Features > Altitude > On / Off
Calibrating the Altitude Manually
Select Settings > Features > Altitude > Calibrate > set the altitude of current location
If the altitude of your location differs significantly from the displayed altitude value Calibrate to xx? is
displayed.
Yes: Altitude calibrated to xx is displayed.
No: Altitude calibration canceled is displayed. The last altitude value stored in the training computer’s
memory is applied.
Calibrate the altitude to ensure it remains accurate. Set the reference altitude whenever a reliable
reference, such as a peak or a topographic map, is available or when at sea level.
Calibrating the Altitude Automatically
Select Settings > Features > Altitude > AutoCalib > On / Off
When automatic calibration is on, the last altitude value stored in the training computer’s memory is
applied when exercising. This feature is especially useful if you always start a session in the same
environment. If automatic calibration fails, you are not in the usual environment and will need to calibrate
the altitude manually.
Altitude calibrated to xx m/ft indicates that calibration has succeeded. If Altitude calibration failed is
displayed, re-calibrate the altitude.
Recording Rate
Select Settings > Features > Rec.rate > 1 / 2 / 5 / 15 / 60 sec
The training computer can store your heart rate, speed/pace,* and altitude in 1, 2, 5, 15 or 60 second
intervals. A longer interval gives you more recording time, while a shorter interval allows you to record
more heart and other data. This enables accurate data analysis using the software.
A shorter recording rate consumes the memory of the training computer more rapidly. The remaining
recording time is displayed on the lower row when setting the rate. Default recording rate is 5 seconds.
When less than 30 minutes of maximum recording time is left, the recording rate changes automatically to
longer recording time (1s > 2s > 5s > 15s > 60s). This will maximize the time to record exercise data.
When the session ends, the current recording rate remains as default.
The following table shows the maximum recording times for each recording rate. Note that recording rate
might change when there is less than 30 minutes of recording time left.
ENGLISH
34 Settings
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar RS800CX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar RS800CX in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar RS800CX

Polar RS800CX User Manual - German - 74 pages

Polar RS800CX User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info