464066
10
Zoom out
Zoom in
Previous page
1/68
Next page
1. Set the Number of zones for the exercise (0-3) and press OK. For 0 zones, see Create a New Exercise
without Zones.
2. Choose Zone type:
Heart rate
For heart rate zones, select sport zones, or manual heart rate zones. Press OK.
Sport zone: Select one of the sport zones (e.g. Z1: 50-59%) for your exercise. Press OK to continue
to step 3.
Polar sport zones are heart rate intensity areas expressed as percentages of your maximum heart rate.
Five different sport zones are set in the training computer as a default: very light (50-59% HR
max
),
light (60-69% HR
max
), moderate (70-79% HR
max
), hard (80-89% HR
max
), and maximum (90-99%
HR
max
). Default HR
max
value is usually age-based, but if you know your aerobic and anaerobic
thresholds, have had your predicted maximum heart rate (HR
max
-p) measured in a Polar Fitness
TestTM, tested your maximum heart rate yourself or in a lab, then you can define sport zones to better
suit your training needs. For more information, see ProTrainer 5 software help.
Manual: Set the high and low zone limits as bpm or HR% / HRR% and press OK to continue to step
3.
Speed/pace (optional s3/s3+ stride sensor, G3/G5 GPS sensor or cycling speed sensor W.I.N.D
required)
For speed/pace zones, set the high and low zone limits. Press OK to continue to step 3.
Cadence (optional s3/s3+ stride sensor or cadence sensor W.I.N.D. required)
For cadence zones, set the high and low zone limits. Press OK to continue to step 3.
3. Set Zone guide to change zone after a specified time or distance*. During your workout, the training
computer will alert you when changing zones.
Timers: Set a timer for the zone (minutes and seconds) and press OK. Or
Distances*: Set the distance for the zone and press OK. Or
Off: Select off for timers and distances and press OK.
Once you have defined the first zone, Zone 1 OK is displayed. For more than one exercise zone, repeat
steps 2 and 3 until all zones are defined.
When the exercise is ready, New exercise added is displayed. The new exercise (NewExe) is stored in the
Exercises menu, where you can select it during your next workout. Rename the exercise by selecting
Rename from the list.
Create a New Exercise without Zones
If you create a new exercise without zones, you can use timers or distances* to guide your training.
Select Settings > Exercises > Add new.
1. Number of zones: Set the number of zones to 0.
2. Guide type: Choose to sound a timer during workout (reminding you to drink, for example), or set a
distance* (for following lap times without recording them).
Timers
Number of timers: Choose the number of timers (1-3) for the session. Press OK.
Timer 1: Define minutes and seconds for the timer and press OK. Or
Distances*
Number of distances: Choose the number of distances (1-3) for the session. Press OK.
Distance 1: Enter the distance(s) and press OK.
Repeat step 2 until you have defined timers or distances*. When the exercise is ready, New exercise
added is displayed. The new exercise (NewExe) is stored in the Exercises menu, where you can select it
during your next workout. Rename the exercise by selecting Rename from the list.
ENGLISH
10 Prepare For Training
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polar RS800CX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polar RS800CX in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polar RS800CX

Polar RS800CX User Manual - German - 74 pages

Polar RS800CX User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info